Looking for my 2nd sandbox? Click here!
 | These pages contain material which is kept because the contents are considered humorous. They are not intended, nor should they be used, for any research or serious use. |
A WikiBorg is a Borg Drone that has been freed from the collective and is now working with Wikipedia. Due to the time these individuals spent int he collective they value accurate information above anything else. If they find a inaccurate article they feel they must correct it or remove it immediately! These users also have a deep hatred towards anyone who disrupts a page by Vandalizing it! They tend to correct it on sight and also tend to leave the responsible user a warning; occasionally even telling the user in question "Resistance is Futile" and "Your spam will not join the collective". These users tend to be cold and calculating, looking for ways to improve there new collective, even is it means ruthlessly eliminating articles that appear to be poorly constructed. It is also worth noting that engaging a WikiBorg in a fight is a very bad idea as these users are capable of rapid adaptation and once they adapt to your fighting style, tend to be immune to anything thrown against them. WikiBorg can be identified by spotting the following userbox on there page.
| This user is a WikiBorg! Beware of his assimilation tubules! "Resistance is futile!" |
| Classical | |
|---|---|
| Medieval | |
| Modern | |
 | This is the sandbox page for User:A Wiggin13 (diff). |
Warn the vandal. Access the vandal's talk page and warn them by posting an appropriate warning template from the following list. It is not necessary to start with the level one warning, particularly when faced with especially egregious or offensive vandalism, when the vandal has damaged multiple articles, or when the vandal has created an account with no positive contributions across more than one editing session. Level one:
Hello, I'm A Wiggin13. I wanted to let you know that I undid one or more of your recent contributions because it didn't appear constructive. If you think I made a mistake, or if you have any questions, you can leave me a message on my talk page. Thanks!
This is a gentle caution regarding unconstructive edits; it encourages new editors to use a sandbox for test edits. This is the mildest warning. Level two:
This warning is also fairly mild, though it explicitly uses the word 'vandalism' and links to the Wikipedia policy. Level three:
Please stop your disruptive editing. If you continue to vandalize Wikipedia, you may be blocked from editing.
This warning is sterner. It is the first to warn that further disruptive editing or vandalism may lead to a block. Level four:
This is your last warning. The next time you vandalize Wikipedia, you may be blocked from editing without further notice.
This is the sharpest vandalism warning template, and indicates that any further disruptive editing may lead to a block without warning.
 | This user has a crush on Asa Butterfield. |
| This user is a WikiBorg! Beware of his assimilation tubules! "Resistance is futile!" |
Computer Coolant
editWhat is the best kind of coolant for a open-air cooling sytem for a computer? My cooling setup has a cooling tower (Kind of like a nuke reactor) but the system is boiling off the water pretty fast and the water is not carrying off as much heat as I wanted... so is there a type of coolant that will not boil off as fast and carries more heat away than water? Andrew Wiggin (talk) 20:01, 11 February 2013 (UTC)
- What kinda computer are you running that needs a cooling tower? Most have heat sinks and little electric fans, and manage fine? --Jayron32 20:03, 11 February 2013 (UTC)
- If you are boiling water, no change of fluid will help. See latent heat of vaporization. You are pouring too much heat into the cooling system. You need bigger pipes and faster flow.
- I use it to learn CAD stuff on... My dad is teaching me so the more power I can milk out of it the fast stuff such a renderings go. Also... A Wiggin is my real name so... ya...speaker of the dead indeed? Andrew Wiggin (talk) 20:05, 11 February 2013 (UTC)
- Lots of computer enthusiasts use mineral oil. It's cheap, colorless, odorless, has a high boiling point (if it doesn't decompose before that), and is so inert that you can submerge the entire motherboard in it with no ill effect. See [1], or just google "mineral oil cooling". --140.180.243.51 (talk) 20:28, 11 February 2013 (UTC)
- But the real question is how much heat can the coolant carry away. Andrew Wiggin (talk) 20:32, 11 February 2013 (UTC)
- I wonder if car coolant would work and how well. Andrew Wiggin (talk) 20:51, 11 February 2013 (UTC)
- Have you tried removing the cover and pointing a 15-inch box fan right at it, on high ? I've never had a computer that overheats using that setup. Sure, the noise is annoying, but so is a liquid cooling system. StuRat (talk) 21:08, 11 February 2013 (UTC)
- I would Prefer not to use fans as I also wish to over clock the system. I just don't think fans will cut it with a overclocked system. Andrew Wiggin (talk) 21:12, 11 February 2013 (UTC)
- Overclocking is ok for a hobby. But the amount of extra oomph you can get out of it will not make much difference to running most programs. I doubt you will get the time back you invest for building a custom cooling system. --Stephan Schulz (talk) 21:34, 11 February 2013 (UTC)
- When it comes to CAD stuff every GHZ you can milk out of the processor can save 2 hours of rendering time. Andrew Wiggin (talk) 21:52, 11 February 2013 (UTC)
- Overclocking is ok for a hobby. But the amount of extra oomph you can get out of it will not make much difference to running most programs. I doubt you will get the time back you invest for building a custom cooling system. --Stephan Schulz (talk) 21:34, 11 February 2013 (UTC)
- Clarification, do you really mean the water is boiling, or just evaporating quickly ? StuRat (talk) 21:39, 11 February 2013 (UTC)
- It is boiling Andrew Wiggin (talk)
- In that case, your cooling system isn't working. The computer shouldn't be running hotter than 100C... Certainly not so much hotter that it is actually boiling the water. You are probably causing serious damage to the components. --Tango (talk) 21:57, 11 February 2013 (UTC)
- Possibly to one of the processors. I am not concerned though. I have a intel over clockers warranty so intel will just send me a new chip if I fry her. Andrew Wiggin (talk) 22:01, 11 February 2013 (UTC)
- In that case, your cooling system isn't working. The computer shouldn't be running hotter than 100C... Certainly not so much hotter that it is actually boiling the water. You are probably causing serious damage to the components. --Tango (talk) 21:57, 11 February 2013 (UTC)
- It is boiling Andrew Wiggin (talk)
- What you should do is go join a specific PC overclocking / cooling forum like extremeoverclocking.com or hardforum.com. You might by chance come across a handful of people here who have practical experience in "extreme" PC cooling, or you could go straight to a popular forum FULL of people who do it for a hobby. Join, put some pics up, ask for advice, it sounds like you have something genuinely unique and unusual, I'm sure they'll love you there and be more then happy to help. Vespine (talk) 21:40, 11 February 2013 (UTC)
- Ya... ok then Andrew Wiggin (talk) 21:50, 11 February 2013 (UTC)
Here is the thing guys. I currently have the system over clocked to almost 6 Ghz. I am aiming for 10 Ghz if I can but with the way the cooling is going I will never make it there. It is critical to me to make it as high as I can just to prove to myself it can be done. Andrew Wiggin (talk) 21:56, 11 February 2013 (UTC)
- Can you give us more details please? Is this all home built or sourced from an over-clocking manufacturer? Is the header tank too small, the radiator not efficient enough or the pump not circulating fluid fast enough? Our water-cooling article discusses Fluorinert, an expensive 3M product, as a computer cooling liquid. This Innovatek article proscribes the use of their propriety fluid to maintain warranty status on their own water-cooling components. Their fluid, "innovaProtect, is a heat conductive fluid with anti freeze, anti algicide and anti corrosion properties". You describe your system as open-air so you are unlikely to be using vapor-compression refrigeration, in which case you will not need anti-freeze. Finally, our heat capacity article lists specific heat capacities of various substances, including water. Let me know if this is useful in any way --Senra (talk) 22:00, 11 February 2013 (UTC)
- Your going to laugh your ass off but its a Mac Pro I am modifying. I am fairly sure the pumps (yes pumps) are moving water fast enough and its a open air design so it has no radiator Andrew Wiggin (talk) 22:04, 11 February 2013 (UTC)
- Not under warranty any more then! What is the model number? --Senra (talk) 22:12, 11 February 2013 (UTC)
- It's the current Mac Pro Server Edition, Special Build (Had to call to have it built) Andrew Wiggin (talk) 22:16, 11 February 2013 (UTC)
- If the water is boiling, I really doubt it is moving fast enough. Either that, or there isn't enough water so it hasn't cooled enough before it does the next circuit. Kettles boil water, CPUs shouldn't... --Tango (talk) 23:56, 11 February 2013 (UTC)
- I think this story sounded fishy from the start but I'm using my "assume good faith" hat. Intel xeon 3.33ghz operating temperature is 5-73 deg C. If you are boiling water with it, that means you are running at least, if not considerably above, 100 deg. I am surprised if it is stable at all, if by some miracle it is, I'll be surprised if you get more then a few weeks out of runnin it at that temp.. And certainly kiss your warranty good bye. Vespine (talk) 00:07, 12 February 2013 (UTC)
- Our enthusiast computer-engineer OP should read these articles: Amdahl's law, megahertz myth, and CPU bound vs. I/O bound or memory bound programs. Increasing clock-speed of the CPU, and even of the memory, often has no effect on total execution time. Nimur (talk) 00:51, 12 February 2013 (UTC)
February 2013
edit Your recent editing history at Joseph Muscat shows that you are currently engaged in an edit war. Being involved in an edit war can result in you being blocked from editing—especially if you violate the three-revert rule, which states that an editor must not perform more than three reverts on a single page within a 24-hour period. Undoing another editor's work—whether in whole or in part, whether involving the same or different material each time—counts as a revert. Also keep in mind that while violating the three-revert rule often leads to a block, you can still be blocked for edit warring—even if you don't violate the three-revert rule—should your behavior indicate that you intend to continue reverting repeatedly.
To avoid being blocked, instead of reverting please consider using the article's talk page to work toward making a version that represents consensus among editors. See BRD for how this is done. You can post a request for help at a relevant noticeboard or seek dispute resolution. In some cases, you may wish to request temporary page protection. --Demiurge1000 (talk) 19:15, 12 February 2013 (UTC)