Wikipedia

User:Graham.Fountain/Triumph TR7

< User:Graham.Fountain

Triumph TR7
Overview
ManufacturerTriumph Motor Company, British Leyland Motor Corporation
Production1975–1981
112,368
(TR7 coupe/hardtop)[1]
28,864
(TR7 cabriolet/roadster)[1]
2,497 (TR8)[1]
AssemblySpeke, Liverpool, England
Canley, Coventry, England
Solihull plant, Solihull, England
DesignerHarris Mann
Body and chassis
ClassSports car
Body style2-door roadster
2-door coupé
LayoutFR layout
RelatedTriumph TR8
Powertrain
Engine1,998 cc (2.0 L) I4. 105 hp (78 kW) @ 5500 rpm, 119 ft lb (161 Nm) @ 3500 rpm [2]
Transmission4-speed manual
5-speed manual
3-speed automatic
Dimensions
Wheelbase85 in (2,159.0 mm)
Length160 in (4,064.0 mm)
Width62 in (1,574.8 mm)
Height50 in (1,270.0 mm) (coupé)
Curb weight2,427 lb (1,101 kg) (coupé)
Chronology
PredecessorTriumph TR6

The Triumph TR7 is a sports car manufactured from September 1974 to October 1981 by the Triumph Motor Company (which was part of British Leyland) in the United Kingdom. It was initially produced at the Speke, Liverpool factory,[2][3][4] moving to Canley, Coventry in 1978 and then finally to the Rover Solihull plant in 1980. The car was launched in the United States in January 1975, with its UK home market debut in May 1976. The UK launch was delayed at least twice because of high demand for the vehicle in the US, with final sales of new TR7s continuing into 1982.

Design and features

edit
 
Rear view of 1977 TR7 (USA)

The car was characterised by its "wedge" shape, which was commonly advertised as: "The Shape of Things to Come", and by a swage line sweeping down from the rear wing to just behind the front wheel. The design was penned by Harris Mann who also designed the wedge-shaped Princess. The car had an overall length of 160 inches (406 cm), width of 66 inches (168 cm), wheelbase of 85 inches (216 cm) and height of 49.5 inches (126 cm). The coupé had a kerbside weight of 2205 pounds (1000 kg). During development, the TR7 was referred to by the code name "Bullet". Original full size model wore MG logos because it was styled at Longbridge, which was not a Triumph factory.[citation needed]

Power was provided by a 105 bhp (78 kW) (92 bhp or 69 kW in the North American version) 1,998 cc eight-valve four-cylinder engine that shared the same basic design as the Triumph Dolomite Sprint engine, mounted in-line at the front of the car. Drive was to the rear wheels via a four-speed gearbox initially with optional five-speed manual gearbox, or three-speed automatic from 1976. The front independent suspension used coil spring and damper struts and lower single link at the front, and at the rear was a four-link system, again with coil springs. There were front and rear anti roll bars, with disc brakes at the front and drums at the rear.

Revisions

edit
 
TR7 broadcord interior. Note lack of lights in driver's door.
 
Green tartan interior (with US spec. steering wheel center).

The interior trim was revised in March 1977, with the broadcord seat covers being replaced with red or green "tartan" check inserts with black leather effect vinyl edging. The tartan trim was also reflected in the door cards in padded matching red or green tartan cloth inserts in the black leather effect vinyl.[5]

The development of the convertible version of the TR7 required the interior light, which was in the headlining, to be removed. This was replaced by lights with integral switches in each of the door cards. A map light, mounted between the seats on the back panel below the rear parcel shelf, was deleted. The convertible also required a smaller fuel filler cap, as the deck area in front of the boot lid was reduced to allow for the stowage of the hood. These modifications were also applied to the hard top for the 1978 year model (starting after the factory summer shutdown in 1977),[5] presumably to maintain commonality of parts on the assembly line. The wheel trims were also changed at this time, from smaller black trims that covered only the centre of the wheels, to larger silver ones, covering the whole wheel.[5] However, only a small number of 1978 year model cars, with the smaller filler cap and lights in the door cards, were produced at Speke, due to the industrial action there in 1977-8.[2]

 
Solihull built TR7 Drop Head Coupe with double bulge bonnet
 
Tan plaid interior of a Triumph TR7. Note later rectangular door lock button in left top.

The development of a V8 engined version, which became the Triumph TR8, required an addition bulge in the bonnet, to clear the carburettors. This produced the "double bulge" or "double bump" bonnet, characteristic of TR7s and TR8s built at Canley and Solihull. However, at least some of the TR7s built at Canley had single bump bonnets;[5] though it is possible these were cars that had not been completed at Speke, possibly due to the industrial action there,[2] and finished off at Canley after production was moved

During production at Canley, the seat trim was again revised, with a plaid cloth in navy blue or tan, with matching coloured leather effect edging, and matching door cards.[5] A further trim change during production at Solihull saw the use of a ruched velour in blue or tan on the seats, with matching inserts on the doors. Also, the internal door lock buttons were changed from the earlier standard BL round ones, to rectangular buttons held on with small grub screws. There was also a change to the trip mile counter's reset button,[5] which became a push type operated through the instrument "glass", rather than a turn type under the dash.

Media appearances and promotions

edit

Various British Leyland vehicles were driven by the lead characters in the British secret agent television series The New Avengers, produced between 1976 and 1977. Amongst them was a yellow TR7 hardtop driven by the character Purdey. The car was immortalised as a children's Dinky Toy and Revell construction kit.

Lucy Ewing drove a silver convertible on the TV show "Dallas."

In 1978 Coca-Cola and Levi's ran promotional competitions with the top prizes being three TR7s in special red and white Coke livery. They also featured denim upholstery and genuine jean patch pockets on the door interiors. Also included were a 12V fridge in the boot and a TV in the glove compartment. Two of the three Coca Cola cars are known to still exist.[citation needed]

Variants and derivatives

edit

TR7 Drophead Coupé

edit
 
Triumph TR7 cabriolet 1998cc Aug 1982

Because of proposed US legislation on roll-over protection at the time of its launch,[citation needed] the TR7 was not initially available as a convertible. In early 1979, Triumph belatedly introduced a convertible version, called the TR7 Drophead Coupé (DHC), which first went on sale in the US (the original hardtop model being known as the Fixedhead Coupé, or FHC). A small number of pre-production cars were manufactured at Speke in 1978, soon after the pre-production TR7 V8 (later designated TR8) and TR7 Sprint cars. The British market received it in early 1980. The prototype for the convertible version of the original Harris Mann design came from Michelotti and the engineering to make it work was done by Triumph.[6]

TR8

edit
Main article: Triumph TR8

For export to the US market, Triumph created a much more powerful Triumph TR8 model in 1977/78, which was a TR7 with a 135 bhp (101 kW) 3.5 L Rover V8 engine. While some genuine TR8 models stayed in Britain, these examples are exceedingly rare. Most TR8s went to the US, where they did not fare well due to both Triumph's poor build quality at the time and the unusually strong pound which peaked at around $2.40 by 1980, making Triumphs fairly expensive compared to competitors.

Spider

edit

In 1980, a limited edition version of the TR7 Drophead was launched for the US market by the US importer. Called the TR7 Spider, it was available only in Maraschino Black, with reflective red striping and badging plus black interior trim. Alloy wheels and the steering wheel from the TR8 were fitted, along with a "pewter grey" carpet and grey striped upholstery. Based on an exhaustive inventory of the factory build cards at the British Heritage Motor Centre archives, it has been confirmed that 1,070 carbureted Spiders were built at the Solihull factory with an additional 548 fuel-injected (Bosch L-jetronic) Spiders built specifically for California. VIN numbers for Spiders run from 400301 to 401918 overall and for the fuel-injected version from 401374 to 401918. All the Spider-specific equipment was installed at the factory, with the exception of the radio/cassette, which was stored in the boot and installed at the port of entry.[7]

Cancelled variants

edit

TR7 Sprint

edit
Main article: Triumph TR7 Sprint

A variant of the TR7 powered by the Dolomite Sprint engine (dubbed the TR7 Sprint) was developed, but never put into full production because of labour problems at the Speke factory and the factory's subsequent closure. According to a search of records at the British Motor Industry Heritage Trust (BMIHT), it appears that 60 to 62 prototype and pre-production cars, all Fixedheads, were made in three batches during 1977, at the same time as the pre-production runs for the convertibles and TR7 V8s. However, registration details are known for only 35 of these cars.

Preparations for full production of the TR7 Sprint stopped with the closure of the Speke Plant. These cars, of which several still exist in the UK, can be identified by a different chassis number to the production 8-valve model: prefixed ACH rather than ACG, etc. The original engines are also numbered with the format CHnnnHE, rather than the VAnnnnHE format of Dolomite 16 valve engines. Despite cancelling the TR7 Sprint before full production began, British Leyland had it homologated for use in competition.

Converting a two-valve TR7 to the four-valve Sprint specification is relatively simple, compared to conversion to TR8 specification, because the TR7 and TR7 Sprint have virtually identical engine blocks. As a result, there are a number of such converted TR7 models around:[8][9][10] "There are a [comparatively] large number of privately built Sprint conversions about... Buyers should beware of this if they are asked a premium price for an alleged 'genuine' TR7 Sprint."[5]

Lynx

edit
 
1978 Triumph TR7 (Project Lynx) Heritage Motor Centre, Gaydon

While the TR7 was under development in the early 1970s, a 2+2 fastback derivative, codenamed Lynx was also planned. The Lynx had a wheelbase stretched by 12 inches (300 mm), the Rover V8 engine, with the rear axle from the Rover SD1. Scheduled for launch in 1978, the Lynx was cancelled when the Speke factory was closed.[4]

Broadside

edit

In early 1979, a joint MG/Triumph project to produce a new sportscar based on the TR7 was started under the name Project Broadside. This was based on the TR7, with a wheelbase stretched by 5 inches (130 mm), with either an O-Series or Rover V8 engine, and both drophead and fastback body styles. Project Broadside was cancelled later in 1979, due to a lack of funding.[4]

Examples of both Lynx and Broadside can be seen at the BMIHT, Gaydon, England.

Boxer

edit

During the latter part of 1979, as an exercise in badge engineering, another MG version of the TR7 was developed under the codename Boxer as a potential replacement for the MGB. Various concepts were presented and ultimately a design from BL's American headquarters at Leonia was accepted. Major changes to the standard TR7 Hardtop were the addition of a MG-type grille to the nose panel, headlights similar to those of a Porsche 928 and a new tail panel with light units from a Rover SD1. The proposal was ultimately rejected on the grounds that the car was insufficiently different from the TR7.[11]

Motorsports

edit
 
A V8-equipped TR7 rally car at the British Motoring Heritage museum.

British Leyland ran a team of TR7s in rally competitions from 1976 to 1980. These cars initially used the 16-valve Dolomite Sprint engine and later switched to the Rover V8 engine (before the introduction of the TR8, so dubbed "TR7 V8"). They were reasonably successful on tarmac events but were less successful on gravel sections. The most successful driver of these cars was Tony Pond.

John Buffum won the SCCA PRO Rally Championship from 1977–1980 driving TR7 and TR7 V8 cars.[12]

The TR7-V8 models continue to be successful in classic rallying events.[13]

Group 44 ran two TR8 cars in TransAm and IMSA Championship from 1978 to 1981, while in Canada a third IMSA car was run with support of JRT Canada and was raced until 1985. Group 44 effort lead to many wins of the TR8 in USA and was the most successful campaign of this type of car.

The fastest road race TR7 was built by RMP Motors in Canada, winning two back to back GT1 championships in 2012–2013.[clarification needed][citation needed]

The 16-valve engined TR7 rally car was homologated for group 4 in October 1975, well before any TR7 Sprints are known to have been produced.[14] This was possible at the time using the "100-off rule", as John Davenport called it, in the FIA's appendix J to the International Sporting Code 1975.[15] This 100-off rule described a list of "Optional equipment which may be recognized with a minimum production of 100 units per year to equip 100 cars" and requirements for their use. However, it did not require that any cars actually be so equipped, just that 100 of the "bolt-on option kits" be produced, listed, and made available for sale. As well as alternative cylinder heads with different numbers of cams and valves, this list of optional equipment also included many other engine, suspension, and transmission components, and so covered the use of the 4-speed, close-ratio gearbox and overdrive from the Triumph Dolomite Sprint (the heavy duty axle from the 5-speed TR7 was initially homologated for group 3 by another, less clear, route, though re-homologated later, presumably on production of 5-speed TR7s).[16][17][15][14] Further modifications, including the larger front brakes and rear disk brakes, were covered as "Optional equipment which may be recognized without a minimum production".[18] In 1975, Appendix J listed yet more modifications allowed, with restrictions, to cars for group 4, including pistons, manifolds, and carburettors, that could be fitted without the FIA needing to recognize or approve them.

However, the 100-off rule was removed from appendix J for 1976; though cars already homologated under the previous rules were allowed to be used until the end of 1977.[19] This meant that the re-homologation of the 16-valve head, granted in February 1978, which was necessary to allow the 16-valve TR7 to continue to be rallied into 1978, had to be obtained without this 100-off rule. This continued use of the Sprint engined TR7 was necessary because Bill Price's Competitions Dept. team at Abingdon had not been certain when the V8 engined TR8 would be granted approval, as this should have required 400 TR8s to have been produced – in the event, it was granted on the 1st April 1978, when far less than 400 TR8s are believed to have been produced (according to the TR Driver's club, only about 150 ACN prefixed commissioning number cars).[15] Several other teams did not re-homologate similar optional equipment, and had to cease using it in 1978, like the Toyota Celica and its 16-valve head, the Lancia Stratos and its 24-valve heads, and the Vauxhall Chevette HS and its Lotus 16-valve head (replaced with the GM 16-valve head as used on the, possibly, 400 homologating HS road cars, after the rally cars failed scrutineering at Rally Portugal in 1978).[20][21]

It is not entirely clear how many 16-valve TR7s were produced prior to this re-homologation, sometime around the 1st of November 1977 – when the "TR7 Sprint Homologation" photographs were taken –:[22] However, it appears to be at least 35 and at most 62.[23][5][24] Similar rally car evolutions of the time are said to have required 50 cars, including the Vauxhall Chevette HSR in 1979, the Porsche 924 Carrera GTS in 1981, and possibly the last (X0/Euro-emission) evolution of the Ford Escort RS1800, also in 1977.[25] However, Graham Robson suggests, in relation to the homologation of the TR8, that the RAC (as the FIA's UK agent) were not always entirely successful in ensuring the full number of homologating cars were produced, and may have counted some cars that actually only ever existed on paper.[15]

Quality problems

edit

Quality problems tended to undermine the car's image in the market place. This was primarily the result of the poor relations between management and workforce and frequent strikes at the Speke factory near Liverpool.[26] Quality improved when production was moved to the Canley plant in Coventry, and later Solihull, however it was too late to save the car's reputation.

In its Frankfurt Motor Show preview edition of September 1977, the German magazine Auto, Motor und Sport reported that the engine of a TR7 press car had given up the ghost and "started to boil" while undergoing a maximum speed measurement exercise over a 4 km (2.5 miles) stretch of track as part of a road test.[27] At the time of the report the cause of the problem was still unknown; British Leyland technicians had already been investigating the car, without comment, for nineteen days.[27]

Production volumes

edit

In total approximately 115,000 TR7 models were built which includes 28,864 soft top/convertibles, and approximately 2,800 TR8 models.[28] As part of a rationalisation introduced by BL boss Sir Michael Edwardes, the Triumph TR7 was axed in 1981 when the Solihull factory ceased making cars.

References

edit
  1. ^ a b c "Oldtimer Katalog". Nr. 23. Königswinter: HEEL Verlag GmbH. 2009: Seite 336. ISBN 978-3-86852-067-5. {{cite journal}}: |volume= has extra text (help); Cite journal requires |journal= (help)
  2. ^ a b c Marren, Brian (2009). "Closure of the Triumph TR7 Factory in Speke, Merseyside, 1978: 'The Shape of Things to Come'?". Retrieved 16 July 2010. {{cite journal}}: Cite journal requires |journal= (help)
  3. ^ "The failure of Triumph in Speke". BBC News. BBC. 8 December 2009. Retrieved 14 July 2010.
  4. ^ a b c Adams, Keith. "AROnline: Triumph TR7/TR8". AROnline.
  5. ^ a b c d e f g h Piggott, B.; Clay, S. (2009). Collector's Originality Guide Triumph TR2 TR3 TR4 TR5 TR6 TR7 TR8. MotorBooks International Company. pp. 312–5. ISBN 9780760335765. Cite error: The named reference "Piggott 2009" was defined multiple times with different content (see the help page).
  6. ^ Knowles, David (2007). Triumph TR7 The Untold Story. Crowood Press. pp. 173–190. ISBN 978-1-86126-891-4.
  7. ^ Hart, Michael. "Counting TR7 Spiders: A Day at the Gaydon Archive". triumphwedgeowners.org. Retrieved 5 December 2014.
  8. ^ "TR Driver's Club Sprint Article". www.trdrivers.com. Retrieved 16 December 2011.
  9. ^ Knowles, David (2007). Triumph TR7 The Untold Story. Crowood Press. pp. 110–115. ISBN 978-1-86126-891-4.
  10. ^ Piggott, Bill (2000) [2000]. "Sprints, Special Editions & Grinnall Conversions". Original Triumph TR7 & TR8. Osceola, WI USA: MBI Publishing. pp. 66–68. ISBN 0-7603-0972-8. Retrieved 26 January 2013.
  11. ^ Hogg, Tony (June 1982). "The MG that almost was". Road and Track. 33 (10): 76D–76H. ISSN 0035-7189.
  12. ^ Knowles, David (2007). Triumph TR7 The Untold Story. Crowood Press. pp. 139–141. ISBN 978-1-86126-891-4.
  13. ^ "Motorsport: Seniors burn up tarmac - Sport - NZ Herald News". Nzherald.co.nz. 4 June 2011. Retrieved 6 August 2011.
  14. ^ a b RAC TR7 Homologation papers number 3071.
  15. ^ a b c d Robson G., The Works Triumphs: 50 Years in Motorsport, 1993, J H Haynes & Co Ltd, ISBN 978-0854299263.
  16. ^ FIA, Appendix J to the International Sporting Code 1975: Classification, definition and specifications of cars, January 27 1975, Article 260, clause z, sub-clause bb.
  17. ^ Bill Price, B.M.C./B.L. Competitions Department: 25 Years in Motorsport - The Cars, the People, the Events, 1989, J H Haynes & Co Ltd, ISBN 978-1859604397.
  18. ^ FIA, Appendix J to the International Sporting Code 1975: Classification, definition and specifications of cars, January 27 1975, Article 260, clause z, sub-clause cc.
  19. ^ FIA, Appendix J to the International Sporting Code 1976: Classification, definition and specifications of cars, December 11 1975, Article 261, clause x, sub-clause dd.
  20. ^ Robson G., "Ford Escort RS1800" Rally Giants, page 16, Veloce Publishing Ltd, 2008, ISBN 1845841409, 9781845841409.
  21. ^ Jeff Whitten, Feature car: Vauxhall Chevette, 2007, [1], Retrieved 24 October 2016.
  22. ^ Negatives from number T105512 to T105517 (6 negatives), "TR7 Sprint Homologation", British Motor Industries Heritage Trust Film & Picture Library.
  23. ^ DVLA Vehicle Enquiry Service (Beta)
  24. ^ Knowles D., Triumph TR7 The Untold Story, 2007, pages 110–5, Crowood Press, ISBN 978-1-86126-891-4.
  25. ^ Roy Smith, The Porsche 924 Carrera: – evolution to excellence, 2014, Veloce Publishing Ltd, ISBN 1845846451, 9781845846459.
  26. ^ Knowles, David (2007). Triumph TR7 The Untold Story. Crowood Press. pp. 86–88. ISBN 978-1-86126-891-4.
  27. ^ a b "Die englische Krankenheit: "Der Motor des TR 7-Testwagen (TR 7-Werbung: Der Sportwagen der achtziger Jahre") gab während einer vier Kilometer langen Höchstgeschwindigkeits Messung seinen Geist auf und begann zu kochen."". Auto Motor u. Sport (in German) (19): 124. 14 September 1977.
  28. ^ http://trdrivers.com/tr7_-_tr8_vin_numbers.htm
edit


[[Category:1970s automobiles]] [[Category:1980s automobiles]] [[Category:British Leyland vehicles]] [[Category:Rear-wheel-drive vehicles]] [[Category:Roadsters]] [[Category:Sports cars]] [[Category:Triumph Motor Company vehicles|TR7]] [[Category:Cars introduced in 1975]] [[Category:Rally cars]]

Retrieved from "https://en.wikipedia.org/w/index.php?title=User:Graham.Fountain/Triumph_TR7&oldid=791839978"