The astute observer will notice these images relate to tools, and in particular, those associated with metalworking.
These are images I've taken and uploaded either here or to the Wikimedia Commons, eventually they'll all be available on the Commons but I've yet to migrate them all. Either way, they are available for reuse under a CC-BY-SA licence, or even GFDL for the later.
Although this gallery is predominately for my benefit, as I'm losing track of what I've uploaded and whether I've edited/created or even found the associated article yet, they are obviously available for anyone to use. The metalworking page is the springboard I use to start the process, although even from that dedicated link I tend to get sidetracked easily.
The image file names are reasonably descriptive of the items pictured (albiet brief). If you want further clarification of any particular item/s then I can expand the description to suit, just leave a message.
-
Coldchisels -
Scribers -
Threading dies -
Threading taps -
Tap Handles, or Tap Wrenches -
Split die (older style) -
Machine collets -
Combination Square Set -
Knurling Tool -
KnurlingExamples -
Pin Chucks -
Diamond Files -
Needle Files -
Riffler Files -
Machine Files -
Odd leg Calipers -
Divider Calipers -
Inside Calipers -
Outside Calipers -
Counter Bores -
4 Fluted Countersink -
Cross Hole Deburrer -
Letter Stamps -
Radius Gauge Set -
Radius Gauges -
Feeler Gauges -
Threading Gauges -
Center or Fish Tail Gauges -
Hand Scrapers -
Small Hole Set -
Scriber Block, aka surface gauge -
Wiggler -
Wiggler Set -
Magnetic Base -
Grinding Cut Off Wheel (Diamond) -
Grinding Straight Wheel H468V -
Grinding Cup Wheel PA46JV -
Reamer Machine Spiral flute -
Reamer Morse Taper 3 -
Reamer Hand Taper Pin -
Reamer Adjustable Hand -
Safety Glasses (wraparound) -
Safety Glasses (with shield) -
Square Engineers Machinist -
Micrometer Depth -
Finger Test Indicator -
Dial Test Indicator -
Center Drills No's.123456 -
Wrench Tap BarT -
Dial Test Indicator -
Magnetic Base Snake -
Grinding Wheel Dresser Disc -
Grinding Wheel Dressers Diamond -
Gauge Gap Plain Go-NoGo -
Gauge Gap Thread Go-NoGo -
Gauge Plug Special Go-NoGo -
Gauge Plug Thread Go-NoGo -
Chuck Drill Keyed & Keyless with arbor -
Sine bars -
Gauge block set - metric -
Gauge block accessory set -
morse taper drills -
core drill -
sand mold showing cope, drag and a core -
casting resulting from previous mold -
core box pattern and casting -
end slot ball nose - milling -
carbide tipped turning tool -
carbide tipped boring bars -
carbide tipped face mill -
HSS slab mill -
hobbing (gear) cutters -
Engineers spirit level -
Precision engineers level -
keyway broach -
Side and face cutter -
Involute gear cutter - No. 4 -
live and dead centers -
Self centering three jaw chuck and key -
Independent four jaw chuck -
-
Mori Seiki Lathe -
Example of turned vase -
Lathe setting tool -
Makino machining center -
Example of thin wall milling -
5 axis Deckel Maho machining center -
Wire cut machine -
Wire cut examples -
11/32 inch drills - long-series morse, plain morse, jobber -
square shank, screw extractors -
12x640mm gun drill and 25mm gun drill tip -
Coolant holes in tip and base of gun drill -
Worm and worm gear -
Scraping pattern on machine slideway -
D bit grinder -
Surface grinder, with manual chuck inset -
Tool and cutter -
"flick" grinder -
View showing simple indexing -
Indexing head and tailstock -
Indexing plates -
10 inch rotary table -
Plastics injection molding machine -
Die (or mold) visible in injection molder -
Small machine vise - drill -
Bench vise -
Machine vise - mill -
Optical flats -
Scan of sectioned, forged conrod that has been etched to show grain flow -
Vernier & electronic height gauge -
Vernier height gauge adjusters -
Vernier height gauge, close up view -
Electronic height gauge, close up view -
machine swarf (turnings) -
Turned chess pieces -
Adjustable angle plate -
Fixed angle plate -
Woodruff key cutters and keys -
Bronze casting showing sprue and risers -
Bronze casting showing shrinkage in sprue -
Micrometer sleeve reading 5.78mm -
Micrometer thimble reading 0.276 inch -
Micrometer sleeve (with vernier) reading 5.783mm -
Inside micrometers, 5–30 and 25–50 -
flat files detailing teeth grades -
Ball screws with inset images -
Inset image for previous photo -
Drive plate, workpiece and carrier setup between centers on lathe -
Side and End view of R8 taper collets -
Progressive die (stamping die), 5 station with finger stops and strip notch position. -
Digital Read Out -
Centre lathe (Hwacheon) -
Highlighted carriage and components of Hwacheon centre lathe -
Highlighted tailstock of Hwacheon centre lathe -
Highlighted headtock of Hwacheon centre lathe -
English wheel with rollers.
