Wikipedia

User:Monster Iestyn/List of ISO standards test

< User:Monster Iestyn

(See List of ISO standards)

ISO number Title and parts Status Notes
ISO 1:2016 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties Published
ISO 2:1973 Textiles — Designation of the direction of twist in yarns and related products Published
ISO 3:1973 Preferred numbers — Series of preferred numbers Published
ISO 4:1997 Information and documentation — Rules for the abbreviation of title words and titles of publications Published
ISO 5 Photography and graphic technology — Density measurements Published
ISO 6:1993 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed Published
ISO 7 Pipe threads where pressure-tight joints are made on the threads Published
ISO 8:2019 Information and documentation — Presentation and identification of periodicals Published
ISO 9:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages Published
ISO/R 10:1955 Aircraft — Ground air-conditioning connections for pressure cabins Withdrawn replaced with ISO 1034
ISO 11:1987 Aircraft — Ground pressure testing connections for pressure cabins Published
ISO 12:1987 Aerospace — Pipelines — Identification Published
ISO 13:1978 Grey iron pipes, special castings and grey iron parts for pressure main lines Withdrawn Withdrawn without replacement
ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification Published
ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan Published
ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch) Published
ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers Published
ISO 18:1981 Documentation — Contents list of periodicals Published
ISO/R 19:1956 Shipbuilding — ? Withdrawn Withdrawn without replacement
ISO/R 20:1956 Shipbuilding — ? Withdrawn Withdrawn without replacement
ISO 21:1985 Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chains Withdrawn Withdrawn without replacement
ISO 22:1991 Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances Published
ISO 23:1993 Cinematography — Camera usage of 35 mm motion-picture film — Specifications Published
ISO/R 24:1956 Cinematography — Projector usage of 35 mm motion — picture films for direct front projection — Specifications Withdrawn replaced with ISO 2939
ISO 25:1994 Cinematography — Camera usage of 16 mm motion-picture film — Specifications Published
ISO 26:1993 Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications Published
ISO/R 27:1956 Cinematography — ? Withdrawn Withdrawn without replacement
ISO 28:1976 Cinematography — Camera usage of 8 mm Type R motion-picture film — Specifications Published
ISO 29:1980 Cinematography — Projector usage of 8 mm Type R silent motion-picture film for direct front projection — Specifications Withdrawn Withdrawn without replacement
ISO/R 30:1956 Bibliographical strip Withdrawn Withdrawn without replacement
ISO 31 Quantities and units Withdrawn replaced with ISO/IEC 80000
ISO 32:1977 Gas cylinders for medical use — Marking for identification of content Published
ISO/R 33:1957 Natural rubber latex concentrate — ? Withdrawn Withdrawn without replacement
ISO 34 Rubber, vulcanized or thermoplastic — Determination of tear strength
  • ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces
  • ISO 34-2:2015 Part 2: Small (Delft) test pieces
 Published
ISO 35:2004 Natural rubber latex concentrate — Determination of mechanical stability Published
ISO 36:2020 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics Published
ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties Published
ISO/R 38:1957 Shipbuilding — ? Withdrawn Withdrawn without replacement
ISO/R 39:1957 Shipbuilding — ? Withdrawn replaced with ISO 1704
ISO/R 40:1957 Shipbuilding — ? Withdrawn replaced with ISO 1704
ISO 41:1980 Shipbuilding — Inland vessels — Covers for deck openings for pumps Withdrawn Withdrawn without replacement
ISO/R 42:1957 Shipbuilding — Inland vessels — Mushroom-type ventilator heads Withdrawn replaced by ISO 3372, now withdrawn without replacement
ISO 43:2016 Aircraft — Jacking pads Published
ISO 44:1975 Aerospace — Lever-operated, two-position, ON/OFF switches — Directions of operation Published
ISO 45:1990 Aircraft — Pressure refuelling connections Published
ISO 46:1973 Aircraft — Fuel nozzle grounding plugs and sockets Published
ISO/R 47:1957 Aircraft — Toilet connections Withdrawn replaced with ISO 450, later ISO 17775
ISO 48 Rubber, vulcanized or thermoplastic — Determination of hardness
  • ISO 48-1:2018 Part 1: Introduction and guidance
  • ISO 48-2:2018 Part 2: Hardness between 10 IRHD and 100 IRHD
  • ISO 48-3:2018 Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
  • ISO 48-4:2018 Part 4: Indentation hardness by durometer method (Shore hardness)
  • ISO 48-5:2018 Part 5: Indentation hardness by IRHD pocket meter method
  • ISO 48-6:2018 Part 6: Apparent hardness of rubber-covered rollers by IRHD method
  • ISO 48-7:2018 Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
  • ISO 48-8:2018 Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
  • ISO 48-9:2018 Part 9: Calibration and verification of hardness testers
 Published
ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1 Published
ISO 50:1977 Metal pipes — Steel sockets screwed according to ISO 7 Withdrawn Withdrawn without replacement
ISO/R 51:1957 Shipbuilding — ? Withdrawn Withdrawn without replacement
ISO/R 52:1957 Belt Drives — ? Withdrawn replaced by ISO 4183
ISO 53:1998 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile Published
ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules Published
ISO 55:1977 Seedlac — Specification Withdrawn Withdrawn without replacement
ISO 56:1979 Shellac — Specification
  • ISO 56-1:1979 Hand-made Shellac — Specification
  • ISO 56-2:1979 Machine-made Shellac — Specification
 Withdrawn Withdrawn without replacement
ISO 57:1975 Bleached lac — Specification Withdrawn Withdrawn without replacement
ISO/R 58:1958 Substances of paper Withdrawn Withdrawn without replacement
ISO 59:1976 Plastics — Determination of acetone-soluble matter Withdrawn Withdrawn without replacement
ISO 60:1977 Plastics — Determination of apparent density of material that can be poured from a specified funnel Published
ISO 61:1976 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel Published
ISO 62:2008 Plastics — Determination of water absorption Published
ISO 63:1975 Flat transmission belts — Lengths Withdrawn Replaced with ISO 22
ISO 64:1974 Carbon steel tubes — Lengths Withdrawn Replaced with ISO 4200:1991
ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1 Published
ISO/R 66:1958 Paper vocabulary — First series of terms Withdrawn Replaced with ISO 4046
ISO 67:1981 Muscovite mica blocks, thins and films — Grading by size Withdrawn Withdrawn without replacement
ISO 68 ISO general-purpose screw threads – Basic profile
  • ISO 68-1:1998 Part 1: Metric screw threads
  • ISO 68-2:1998 Part 2: Inch screw threads
 Published
ISO 69:1998 Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions Published
ISO 70:1981 Cinematography — 35 mm negative photographic sound record on 35 mm motion-picture film — Position and maximum width dimensions Published
ISO 71:2014 Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film—Positions and dimensions Published
ISO/R 72:1958 Cinematography — ? Withdrawn Withdrawn without replacement
ISO/R 73:1958 Cinematography — Image area produced by camera aperture on 35 mm motion-picture film — Positions and dimensions Withdrawn replaced by ISO 2906 and ISO 2907
ISO 74:1976 Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film — Positions and dimensions Published
ISO 75 Plastics — Determination of temperature of deflection under load
  • ISO 75-1:2020 Part 1: General test method
  • ISO 75-2:2013 Part 2: Plastics and ebonite
  • ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
 Published
ISO 76:2006 Rolling bearings — Static load ratings Published
ISO/R 77:1958 Documentation — Bibliographical references — Essential elements Withdrawn Withdrawn without replacement
ISO 78 Chemistry — Layouts for standards[Note 1]
  • ISO/R 78:1969 Guide on the form for standards for chemical products and for methods of chemical analysis [Withdrawn without replacement]
  • ISO 78-2:1999 Chemistry — Layouts for standards — Part 2: Methods of chemical analysis
  • ISO 78-3:1983 Chemistry — Layouts for standards — Part 3: Standard for molecular absorption spectrometry [Withdrawn without replacement]
  • ISO 78-4:1983 Layouts for standards — Part 4: Standard for atomic absorption spectrometric analysis [Withdrawn without replacement]
 Published
ISO/TR 79:2015 Reference materials - Examples of reference materials for qualitative properties Published
ISO/R 80:1968 Rockwell hardness test (B and C scales) for steel Withdrawn replaced with ISO 6508
ISO/R 81:1967 Vickers hardness test for steel (Load 5 to 100 kgf) Withdrawn replaced with ISO 6507-1
ISO 82:1974 Steel — Tensile testing Withdrawn replaced with ISO 6892-1
ISO 83:1976 Steel — Charpy impact test (U-notch) Withdrawn replaced with ISO 148-1
ISO/R 84:1959 Izod impact test for steel Withdrawn Withdrawn without replacement
ISO/R 85:1959 Bend test for steel Withdrawn replaced with ISO 7438
ISO 86:1974 Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick Withdrawn replaced with ISO 6892-1
ISO/R 87:1959 Simple bend testing of steel sheet and strip less than 3 mm thick Withdrawn replaced with ISO 7438
ISO/R 88:1959 Reverse bend testing of steel sheet and strip less than 3 mm thick Withdrawn replaced with ISO 7799
ISO 89:1974 Steel — Tensile testing of wire Withdrawn replaced with ISO 6892-1
ISO 90 Light gauge metal containers — Definitions and determination of dimensions and capacities
  • ISO 90-1:1997 Part 1: Open-top cans
  • ISO 90-2:1997 Part 2: General use containers
  • ISO 90-3:2000 Part 3: Aerosol cans
 Published
ISO 91:2017 Petroleum and related products — Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions Published
ISO 92:1976 Textile machinery and accessories — Spinning machinery — Definition of side (left or right) Published
ISO 93 Textile machinery and accessories — Cylindrical sliver cans
  • ISO 93-1:2006 Part 1: Main dimensions
  • ISO 93-2:2006 Part 2: Spring bottoms
  • ISO 93-3:1981 Part 3: Packaging sliver cans (press cans) [Withdrawn without replacement]
 Published
ISO 94:1982 Textile machinery and accessories — Spindle gauges for ring-spinning and ring-doubling frames Published
ISO/R 95:1972 Textile machinery and accessories Withdrawn Withdrawn without replacement
ISO 96 Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames
  • ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers
  • ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers
 Published
ISO 97:1975 Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers Withdrawn replaced with ISO 96-2
ISO 98:2001 Textile machinery and accessories — Spinning preparatory and spinning machinery — Main dimensions of coverings for top rollers Published
ISO 99:1975 Pulleys for flat transmission belts — Diameters Withdrawn Replaced with ISO 22


Cite error: There are <ref group=Note> tags on this page, but the references will not show without a {{reflist|group=Note}} template (see the help page).

Retrieved from "https://en.wikipedia.org/w/index.php?title=User:Monster_Iestyn/List_of_ISO_standards_test&oldid=1134055021"