Specifications

edit
Utilite Value Utilite Standard Utilite Pro Utilite2 4GB Utilite2 SSD Extra zbriši
Target price: US$ 99 US$ 159 US$ 219 US$ 192 US$ 229
SoC: Broadcom BCM2835 (CPU, GPU, DSP, SDRAM, and single USB port)[1][2] Broadcom BCM2836 (CPU, GPU, DSP, SDRAM, and single USB port) Broadcom BCM2835 (CPU, GPU, DSP, SDRAM, and single USB port)[1][2]
CPU: 1 GHz Freescale i.MX6 single-core ARM Cortex-A9 1 Ghz Freescale i.MX6 dual-core ARM Cortex-A9 1.2 Ghz Freescale i.MX6 quad-core ARM Cortex-A9 1.7 Ghz Qualcomm Snapdragon 600 (APQ8064) quad-core
GPU: Broadcom VideoCore IV @ 250 MHz[3][4]
OpenGL ES 2.0 (24 GFLOPS)
MPEG-2 and VC-1 (with license),[5] 1080p30 h.264/MPEG-4 AVC high-profile decoder and encoder[1]
Memory (DDR3-1066): 512 MB 2 GB
USB 2.0 ports:[6] 1 (direct from BCM2835 chip) 2 (via the on-board 3-port USB hub)[7] 4 (via the on-board 5-port USB hub)[8][9] 1 (direct from BCM2835 chip)
Video input: 15-pin MIPI camera interface (CSI) connector, used with the Raspberry Pi camera or Raspberry Pi NoIR camera[10] 2× MIPI camera interface (CSI)[2][11][12]
Video outputs: HDMI (rev 1.3 & 1.4),[13] 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards,[14] composite video (PAL and NTSC) via RCA jack HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via 3.5 mm TRRS jack shared with audio out HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via RCA jack HDMI (rev 1.3 & 1.4), 14 HDMI resolutions from 640×350 to 1920×1200 plus various PAL and NTSC standards, composite video (PAL and NTSC) via 3.5 mm TRRS jack shared with audio out HDMI, 2× MIPI display interface (DSI),[2][12] MIPI display interface (DSI) for raw LCD panels,[15][16] composite video[11][17]
Audio inputs: As of revision 2 boards, I²S[18]
Audio outputs: Analog via 3.5 mm phone jack; digital via HDMI and, as of revision 2 boards, I²S Analog, HDMI, I²S
Onboard storage:[6] SD / MMC / SDIO card slot (3.3 V with card power only) MicroSD[8] SD / MMC / SDIO card slot MicroSD 4-GB eMMC flash memory chip;[2] may or may not support external SD cards with configuration changes
Onboard network:[6] None 10/100 Mbit/s Ethernet (8P8C) USB adapter on the third/fifth port of the USB hub (SMSC lan9514-jzx)[7] None
Low-level peripherals: GPIO,[19] plus the following, which can also be used as GPIO: UART, I²C bus, SPI bus with two chip selects, I²S audio[20] +3.3 V, +5 V, ground[3][21]
17× GPIO plus the same specific functions, and HAT ID bus GPIO, plus the following, which can also be used as GPIO: UART, I²C bus, SPI bus with two chip selects, I²S audio +3.3 V, +5 V, ground.

An additional 4× GPIO are available on the P5 pad if the user is willing to make solder connections

17× GPIO plus the same specific functions, and HAT ID bus 46× GPIO, some of which can be used for specific functions including I²C, SPI, UART, PCM, PWM[22]
Power ratings: 300 mA (1.5 W)[23] 200 mA (1 W)[24] 700 mA (3.5 W) 600 mA (3.0 W)[8] similar to Model A+
Power source: 5 V via MicroUSB or GPIO header 5 V
Size: 85.60 mm × 56.5 mm (3.370 in × 2.224 in) – not including protruding connectors 65 mm × 56.5 mm (2.56 in × 2.22 in) – (same as HAT board) and 10 mm high 85.60 mm × 56.5 mm (3.370 in × 2.224 in) – not including protruding connectors 67.6 mm × 30 mm (2.66 in × 1.18 in)
Weight: 45 g (1.6 oz) 23 g (0.81 oz) 45 g (1.6 oz) 7 g (0.25 oz)[25]
  1. ^ a b c "BCM2835 Media Processor; Broadcom". Broadcom.com. 1 September 2011. Retrieved 6 May 2012.
  2. ^ a b c d e Cite error: The named reference CM-Announcement was invoked but never defined (see the help page).
  3. ^ a b "Q&A with our hardware team". Raspberry Pi Foundation. Retrieved 20 September 2011.
  4. ^ Halfacree, Gareth. "Raspberry Pi - The Model B". bit-tech.net. Dennis Publishing Limited. Retrieved 10 June 2013.
  5. ^ Cite error: The named reference rpi-codec was invoked but never defined (see the help page).
  6. ^ a b c "Verified USB Peripherals and SDHC Cards;". Elinux.org. Retrieved 6 May 2012.
  7. ^ a b "SMSC LAN9512 Website;". Smsc.com. Retrieved 6 May 2012.
  8. ^ a b c Cite error: The named reference B-Plus-Announcement was invoked but never defined (see the help page).
  9. ^ "Microchip/SMSC LAN9514 data sheet;" (PDF). Microchip. Retrieved 15 July 2014.
  10. ^ "diagram of Raspberry Pi with CSI camera connector". Elinux.org. 2 March 2012. Retrieved 22 June 2012.
  11. ^ a b Adams, James (3 April 2014). "Raspberry Pi Compute Module electrical schematic diagram" (PDF). Raspberry Pi Foundation. Retrieved 22 September 2014.
  12. ^ a b Adams, James (3 April 2014). "Raspberry Pi Compute Module IO Board elecrical schematic diagram" (PDF). Raspberry Pi Foundation. Retrieved 22 September 2014.
  13. ^ "Embedded Linux Wiki: Hardware Basic Setup". Elinux.org. Retrieved 25 May 2013.
  14. ^ "Raspberry Pi, supported video resolutions". eLinux.org. 30 November 2012. Retrieved 11 December 2012.
  15. ^ "Raspberry Pi Wiki, section screens". Elinux.org. Retrieved 6 May 2012.
  16. ^ "diagram of Raspberry Pi with DSI LCD connector". Elinux.org. Retrieved 6 May 2012.
  17. ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.
  18. ^ "I2S driver development thread". Retrieved 16 September 2014.
  19. ^ More GPIOs can be used if you do not use the low level peripherals
  20. ^ Since the release of the revision 2 model
  21. ^ "Raspberry Pi GPIO Connector;". Elinux.org. Retrieved 6 May 2012.
  22. ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.
  23. ^ "Power supply confirmed as 5V micro USB". Raspberrypi.org. Retrieved 25 July 2012.
  24. ^ http://www.raspi.today/raspberry-pi-model-a-plus-out-now/
  25. ^ Adams, James (7 April 2014). "Comment by James Adams on Compute Module announcement". Raspberry Pi Foundation. Retrieved 22 September 2014.