User:Tdownie/sandbox

Daggerboard

Catamarans are steady because of the multihull with daggerboards

Keel is vertically removable

A daggerboard is a vertically removable keel that travles through the hull of the rig along its center line usually in mid section. In the early 19th century daggerboards were rarely being used on schooners. A schooner is an American ship with two or more masses. These schooners were used for nearby coastal trade of cotton, wheat and apples. A sunken 1833 daggerboard schooner was found in the great lakes with the help of solar equipment. Knowing this, daggerboards have been around since late the 17 century. Daggerboards can be found on monohulls which is the classic sailboat and multihulls called catamarans. During in an event which a sailboat flips on its side the keel can be used to up right it back where it belongs by standing on the keel while pulling the sail in your direction. Of course up righting a sailboat is easier with smaller rigs. Daggerboards come in all different shapes and sizes, some curved or s- shaped. The funky looking ones seem to best work in fast speeds. Theses shapes cause the board to foil and lift the hull out of the water a little bit.

Purpose

The purpose of the daggerboard is to grip the water and keep the boat from being blown in the direction of the wind. It gives stability and provides lift. Lift is important so the nose of the rig rides up so it doesn’t drag as much through the water. Without a daggerboard the boat cannot go anywhere up wind. Generally daggerboards are used on smaller rigs such as 10 to 40 feet for racing. It mostly based off personal preference, whether or not you actually want a dagger board. Daggerboards are faster than fixed keels because fixed keels have so much hydrodynamic drag by the shape. The shape can resemble an airplane wing which is aerodynamic. Monohulls allow the sailor to tack much quicker than catamarans. Tacking is where a sailboat wants to go up wind, but it cannot go directly into the wind so It goes in a zigzag pattern till the destination is reached.

How it works

The daggerboard provides stability and lift. The force of a daggerboard depends on the length, width, and angle of the daggerboard. The daggerboard works as an opposite reaction of the force on the sails. Because the water is a lot denser than air, the lager surface area of the sails equals the force of the daggerboard pushing against the water. A daggerboard fits into a trunk that runs through the hull of the rig. When the board is in the truck it keeps the water out while in use due to how tightly wedged it is. It is held in place by a pin on the forward end or a shock cord. The daggerboard puts a counter force from the wind pushing on the sails. A sailboat can go in any direction, but not directly into the wind. During a Storm daggerboards can help reduce the tendency to tip over from waves. A catamaran is in a storm he would lift the daggerboard leeward and put the up wind half way in. in catamarans if there is no wind and have to use an out board motor lifting the daggerboards will ensure the least drag.

History

A daggerboard is a removable keel that comes out vertically from its housing. Theses boards were made out of wood; the problem with wood is it floats. An alternate material that is great for daggerboards are metal (aluminum/steel) and fiberglass. The process in making a daggerboard rig is that it is very costly. If not well made the annoying sound of a rattle form the board trunk can destroy the interest of sailing. Dagger boards are fragile and will break if hit against a rock. The difference between daggerboards from centerboards and keels are it is removable. Centerboards are mechanically pivoted on a pin causing the board to swing into the hull of the boat. The advantage of it doing that is when you are sailing over shallow reef it won’t snap the board as if it were a fixed keel or daggerboard. Curved dagger boards started to appear thirty- forty years ago. The first prototype was made in 1985 by Ian Farrier. The benefits of vertical lift of the curved daggerboard on rigs showed on paper. When actually sailing curved daggerboards do not have a drastic change.

Reference

Hankinson, K. (1973). Rigging small sailboats. Bellflower, Calif.: Glen-L. Keel dagger board rudder. (n.d.). Retrieved March 22, 2015, from http://www.mecaflux.com/en/keel dagger board rudder.htm Firebird Catamaran. (n.d.). Retrieved March 22, 2015, from http://www.firebirdcat.com/technical_information.htm/technical_info_daggerboard.htm Rare dagger-board schooner discovered in deep water off Oswego, N.Y. Read more at http://www.toledoblade.comRare-dagger-board-schooner-discovered-in-deep-water-off-Oswego-N-Y. (2014, September 8). The Blade. Retrieved April 7, 2015, from http://www.toledoblade.com/local/2014/09/08/Rare-dagger-board-schooner-discovered-in-deep-water-off-Oswego-N-Y.html Daggerboards vs. Keels. (n.d.). Retrieved April 8, 2015, from http://www.multihullcompany.com/Article/Daggerboards_vs._Keels Multihull Keels and Daggerboards | Catamaran Dealer. (2009, March 12). Retrieved April 8, 2015, from http://www.aeroyacht.com/2009/03/12/multihull-keels-and-daggerboards/)