M S DIVEKAR

Welcome!

Hello, M S DIVEKAR, and welcome to Wikipedia! Thank you for your contributions. I hope you like the place and decide to stay. Here are some pages that you might find helpful:

• Introduction to Wikipedia
• The five pillars of Wikipedia
• How to edit a page and How to develop articles
• How to create your first article
• Simplified Manual of Style

Please remember to sign your messages on talk pages by typing four tildes (~~~~); this will automatically insert your username and the date. If you need help, check out Wikipedia:Questions, ask me on my talk page, or ask your question on this page and then place {{help me}} before the question. Again, welcome! Arc de Ciel (talk) 11:12, 30 June 2013 (UTC)

June 2013

Hello, I'm Arc de Ciel. I wanted to let you know that I undid one or more of your recent contributions to Betz' law because it did not appear constructive. If you think I made a mistake, or if you have any questions, you can leave me a message on my talk page. Arc de Ciel (talk) 04:05, 30 June 2013 (UTC)

Talkback

Hello, M S DIVEKAR. You have new messages at Arc de Ciel's talk page.
You can remove this notice at any time by removing the {{Talkback}} or {{Tb}} template.

--Arc de Ciel (talk) 11:12, 30 June 2013 (UTC)

Hello, M S DIVEKAR. You have new messages at Arc de Ciel's talk page.
You can remove this notice at any time by removing the {{Talkback}} or {{Tb}} template.

--Another response for you on the Betz' Law issue. :-) Arc de Ciel (talk) 07:56, 3 July 2013 (UTC)

Help request

I do accept that formula computation at 21 on page 25 is alright and gives Cp = 16/27.Here the authors - and myself did realize that we had made a mistake of not taking into consideration change in area of cross section of the wind along the path.

So the authors proceed to make corrections are recomputed by going on page 26, the authors derive Pideal as = (8/9)*(1/2)*ρ*S1*(V1^3).

Now refer to diagram at Fig 1 on page 21 where S1 is area through which wind is captured at velocity V1. So far it is fine.

Then the author uses a correction factor for area of the wind to say S = 3/2* S1 at the top of page 27. Then P ideal is recomputed as = (16/27)*(12)*S* (V1^3). Again referring to the fig 1, S – is area where the turbine blade is supposed to be located (If I change the turbine blade design – innovatively from S1 end to S2 end- this assumption is not valid), while velocity is at input end.

So are we using different factors taking area at one point and velocity along another point on the path of the wind- to justify BETZ’s formula of Cp= 16/27 ???? This is scientifically incorrect.

I personally feel that we should stop at Pideal = (8/9)*(1/2)*ρ*S1*(V1^3) which means we can extract 88.88 % of the power in the wind captured and not some 16/27 =59.26%.

May be you could consult experts and put my comments as foot note on the Wikipedia.

59.92.217.70 (talk) 09:05, 3 July 2013 (UTC)

Hi! I fixed your template for you, so someone should arrive shortly. As a quick note for the editor who responds, the edit in question is at Betz' law, and discussion is here (the comment above is the latest response). The article talk page seems inactive, so my recommendation is for M S Divekar to ask at Wikiproject Physics. Arc de Ciel (talk) 21:31, 3 July 2013 (UTC)

I'm not a physicist either, but for all I can tell, Betz doesn't really care about S1 or S2 at all and ignores radial velocities - it considers power extracted from the air flowing through the (assumed to be) planar rotor and doesn't bother with computing how much area that air flows through before or after it is affected by the rotor. Betz only cares about how fast that air once was, how slow it will at some point be, and about the rotor area in between. Yes, that's a simplification of what really happens, and the Betz' law article admits as much. The S₁=2/3*S factor for the optimal result can be reverse-engineered from v₁=3*v₂; in general you have $S_{1}v_{1}=Sv=S{\frac {1}{2}}(v_{1}+v_{2})$. For a more thorough explanation you may want to try the reference desk. Huon (talk) 23:47, 3 July 2013 (UTC)

FLOORING IN OPERATION THEATER

Kindly take this as a request for a new topic / article to be created. I ma not an expert and hence was looking for guidelines. Lot of sensitive electronic equipment are used to monitor various parameters of a patient. If static charges are allowed to accumulate or flooring is not grounded, it could give erroneous results of patient's health parameters. Further the flooring must be anti fungal, antibacterial, not allow dust accumulation, should be bright - to enable anyone to see dust / dirt accumulation - to see it gets cleaned immediately. Hope some experts will do the needful and create a new topic / article. (m s divekar)