This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
The Victoria Highway links the Great Northern Highway in Western Australia with the Stuart Highway in the Northern Territory.[1] The highway is a part of the Perth–Darwin National Highway link. It is signed as National Highway 1, and is part of Highway 1, a circular route around the country. It is 555 kilometres (345 mi) long, and most of the route – some 470 kilometres (290 mi) – lies within the Northern Territory. In some areas it runs in parallel with the Northern Territory's Victoria River, from which its name originates.
Victoria Highway –Northern Territory | |
---|---|
Map of north-western Australia with Victoria Highway highlighted in red | |
Coordinates | |
General information | |
Type | Highway |
Length | 557 km (346 mi) |
Route number(s) |
|
Major junctions | |
West end | Great Northern Highway (National Highway 1), 56km south of Wyndham, Western Australia |
| |
East end | Stuart Highway, (National Highway 1), Katherine, Northern Territory |
Location(s) | |
Major settlements | Kununurra, Victoria River |
Highway system | |
History
editOriginally a series of unformed tracks linking pastoral holdings, the route was developed as a gravel road in the 1950s to aid the beef industry. Improvements took place in the 1960s which tied in with the development of the Ord Irrigation Scheme, which enabled the introduction of road trains. It was designated as National Highway in 1974 and was fully reconstructed and sealed to a good standard by the early 1990s. The highway serves pastoral, mining and tourism industries, as well as the Ord Irrigation Scheme agricultural development near Kununurra.
Route description
editThe highway is described as spectacular,[citation needed] with escarpment ranges, the unique boab trees and the mighty Victoria River that runs into deep valleys and spectacular gorges. Its eastern terminus is at Katherine which is renowned for Katherine Gorge. In Western Australia, the access road to the Ord River Dam which holds back Lake Argyle – Australia's largest artificial lake – begins at the Victoria Highway just west of the Western Australia / Northern Territory border. The western terminus is at Great Northern Highway, south of Wyndham, WA.
The highway connects the towns of Kununurra, Timber Creek, and Katherine
Flooding
editThe highway crosses Victoria River near Timber Creek, and this crossing is particularly flood-prone in the wet season. Water overtopping the bridge can cut the main Western Australia - Northern Territory link for days or even weeks during the November - April rainy period. It is not unheard of for the bridge surface to at times be submerged below 10 metres of floodwaters.[citation needed] Ultimately, in May 2008 a project was done to replace the old bridge with a new one. At 7 metres (23 feet) higher, it is high enough to avoid most floods. Only an average of one-in-twenty year floods will be high enough to flood over the new bridge. Additional bridges and height increases of other sections of the highway were undertaken at the same time.[2] As of September 2014, the new bridge has not yet been flooded over.
Major intersections
editState | LGA | Location | km[3] | mi | Destinations | Notes |
---|---|---|---|---|---|---|
Western Australia | Wyndham-East Kimberley | Lake Argyle | 0 | 0.0 | Great Northern Highway (National Highway 1 south) – Wyndham, Halls Creek | T-Junction: Victoria Highway continues west as Great Northern Highway; National Highway 1 concurrency terminus: continues south |
87.6 | 54.4 | Western Australia / Northern Territory border | ||||
Northern Territory | Victoria Daly | Baines | ||||
101 | 63 | Duncan Road – Halls Creek | ||||
Timber Creek | 300 | 190 | Buchanan Highway (National Route 80) – Birdum | |||
Delamere | 432 | 268 | Buntine Highway (National Route 96) – Nicholson | |||
Katherine | Katherine | 557 | 346 | Stuart Highway (National Highway 1) – Darwin, Tennant Creek, Alice Springs | Eastern highway terminus | |
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
|
See also
editReferences
edit- ^ Hema, Maps (2007). Australia Road and 4WD Atlas (Map). Eight Mile Plains Queensland: Hema Maps. pp. 89, 96. ISBN 978-1-86500-456-3.
- ^ "Victoria Highway Upgrade". Steelcon Constructions (NT). Archived from the original on 15 December 2014. Retrieved 29 September 2014.
- ^ "Victoria Highway" (Map). Google Maps. Retrieved 14 June 2013.
- The Penguin Australian Road Atlas, 18th edition. Ringwood, Victoria: Penguin Books Australia Ltd. 1999. ISBN 0-670-88570-3.