The Volkswagen wasserboxer is a four cylinder horizontally opposed pushrod overhead-valve (OHV) petrol engine developed by Volkswagen. The engine is water-cooled, and takes its name from the German: "Wasserboxer" ("water-boxer"); with "boxer" being another term for horizontally opposed engines. It was available in two displacements – either a 1.9-litre[1] or a 2.1-litre;[1] the 2.1-litre being a longer-stroke version of the 1.9-litre, both variants sharing the same cylinder bore.[1] This engine was unique to the Volkswagen Type 2 (T3) (Transporter T3 / Caravelle / Vanagon / T25), having never been used in any other vehicle.[1] Volkswagen contracted Oettinger to develop a six-cylinder version of this engine. Volkswagen decided not to use it, but Oettinger sold a Volkswagen Type 2 (T3) equipped with this engine.[2]

Volkswagen wasserboxer
Overview
ManufacturerVolkswagen Group
ProductionAugust 1982 – July 1992[1]
Layout
Configurationflat-4 petrol engine
Displacement1,914 cc (116.8 cu in),
2,109 cc (128.7 cu in)
Cylinder bore94 mm (3.70 in)[1]
Piston stroke69 mm (2.72 in)
76 mm (2.99 in)
Cylinder block materialCast aluminium alloy
Cylinder head materialCast aluminium alloy
Valvetrainpushrod OHV
Combustion
Fuel systemcarburettor / Electronic Fuel Injection
Fuel typePetrol/gasoline
Oil systemWet sump
Cooling systemWater-cooled
Chronology
PredecessorVolkswagen air-cooled engine

Design detail

edit

The wasserboxer featured a cast aluminium alloy cylinder block, cylinder heads, and pistons; and a die-forged steel flat plane crankshaft with four main bearings.[1]

The wasserboxer, as with all Volkswagen boxer engines, directly drives the three-bearing camshaft via a small steel gear on the crankshaft, and a large aluminium one on the camshaft, so there is no timing belt or timing chain. The entire mechanism is internal to the engine, so there should be no concerns regarding wear or replacements, as long as the engine oil is changed regularly. The overhead poppet valves each feature two concentric valve springs, and are operated by pushrods, with adjustable rocker arms to facilitate valve clearance adjustment.[1]

It also featured a "Heron cylinder head", or "bowl-in-piston" type combustion chambers – where the combustion takes place within the piston area, and not in a recess machined in the cylinder head.[1]

The cylinder banks contain cast iron cylinder liners inserted into the crankcase surrounded by a water jacket, with a "rubber lip" style water jacket seal, which is a very different design as compared to most engines. The top of the cylinder liners is pressed into a recessed cut-out in the cylinder heads, that are sealed with compressible metal rings, to prevent leakage.[1]

Some wasserboxers were plagued by water jacket gasket failures (often erroneously referred to as head gaskets) due to several design issues. Engine failure was also a result of poorly placed sensors, corrosion in the cooling system, often caused by using phosphated coolant, and many areas were subjected to leaks.

The switch to water-cooling for the boxer engines was made mid-year in 1982, because Volkswagen could no longer make the air-cooled engines meet emissions standards. (The previous generation Volkswagen Type 2 (T2), produced in Brazil until 2013, was changed to water-cooled engines on 23 December 2005 in response to Brazil's emission laws; the power plant used in the previous-generation T2 was an Audi-sourced inline four.) Water-cooled T2 models can be distinguished by a second radiator grille.

Variants

edit

All data from ETKA and Owner's Manuals.[1]

engine
ID code
compr.
ratio
DIN-rated max. motive power fuel system years notes
1.9-litre engines — 1,914 cc (116.8 cu in)
DF 8.6:1 44 kW (60 PS; 59 bhp) 34 PICT-5 carburetor 08/82–07/92
DG 8.6:1 57 kW (77 PS; 76 bhp) 2E3 or 2E4 carburetor 08/82–07/92
DH 60 kW (82 PS; 80 bhp) Digijet (Digital-Jetronic) fuel injection, vane-type air flow meter 01/83–07/85
EY 7.5:1 41 kW (56 PS; 55 bhp) 34 PICT-5 carburetor
GW 8.6:1 66 kW (90 PS; 89 bhp) Digijet (Digital-Jetronic) fuel injection, vane-type air flow meter 08/83–07/85
SP 54 kW (73 PS; 72 bhp) 2E3 or 2E4 carburetor 08/86–07/89 Switzerland only
2.1-litre engines — 2,109 cc (128.7 cu in)
DJ 10:1 82 kW (111 PS; 110 bhp) Digijet (Digital-Jetronic) fuel injection, vane-type air flow meter 08/84–07/92 sold in European countries not requiring catalytic converter
MV 9:1 70 kW (95 PS; 94 bhp) Digifant fuel injection, vane-type air flow meter 08/85–07/92 90 bhp in USA and Canada; also used until the end of Vanagon importation into the USA and Canada in 1991
SR 64 kW (87 PS; 86 bhp) Digifant fuel injection, vane-type air flow meter 08/86–07/92 Switzerland only
SS 9:1 68 kW (92 PS; 91 bhp) Digifant fuel injection, vane-type air flow meter 08/89–07/92

See also

edit

References

edit
edit