Zirconium(IV) chloride

(Redirected from Zirconium tetrachloride)

Zirconium(IV) chloride, also known as zirconium tetrachloride, (ZrCl4) is an inorganic compound frequently used as a precursor to other compounds of zirconium. This white high-melting solid hydrolyzes rapidly in humid air.

Zirconium(IV) chloride
Names
IUPAC names
Zirconium tetrachloride
Zirconium(IV) chloride
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.030.041 Edit this at Wikidata
EC Number
  • 233-058-2
UNII
  • InChI=1S/4ClH.Zr/h4*1H;/q;;;;+4/p-4 checkY
    Key: DUNKXUFBGCUVQW-UHFFFAOYSA-J checkY
  • InChI=1/4ClH.Zr/h4*1H;/q;;;;+4/p-4
    Key: DUNKXUFBGCUVQW-XBHQNQODAQ
  • Cl[Zr](Cl)(Cl)Cl
Properties
ZrCl4
Molar mass 233.04 g/mol
Appearance white crystals
Density 2.80 g/cm3
Melting point 437 °C (819 °F; 710 K) (triple point)
Boiling point 331 °C (628 °F; 604 K) (sublimes)
hydrolysis
Solubility concentrated HCl (with reaction)
Structure
Monoclinic, mP10
P12/c1, No. 13
Thermochemistry
125.38 J K−1 mol−1
181.41 J K−1 mol−1
−980.52 kJ/mol
Hazards
GHS labelling:[2]
GHS05: Corrosive GHS07: Exclamation mark GHS08: Health hazard
Danger
H290, H302, H312, H314, H317, H332, H334
P234, P260, P261, P264, P270, P271, P272, P280, P285, P301+P312, P301+P330+P331, P302+P352, P303+P361+P353, P304+P312, P304+P340, P304+P341, P305+P351+P338, P310, P312, P321, P322, P330, P333+P313, P342+P311, P363, P390, P404, P405, P501
NFPA 704 (fire diamond)
NFPA 704 four-colored diamondHealth 3: Short exposure could cause serious temporary or residual injury. E.g. chlorine gasFlammability 0: Will not burn. E.g. waterInstability 2: Undergoes violent chemical change at elevated temperatures and pressures, reacts violently with water, or may form explosive mixtures with water. E.g. white phosphorusSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
3
0
2
Flash point Non-flammable
Lethal dose or concentration (LD, LC):
1488-1500 mg/kg (oral, rat)
655 mg/kg (mouse, oral)[1]
Safety data sheet (SDS) MSDS
Related compounds
Other anions
Zirconium(IV) fluoride
Zirconium(IV) bromide
Zirconium(IV) iodide
Other cations
Titanium tetrachloride
Hafnium tetrachloride
Related compounds
Zirconium(II) chloride, Zirconium(III) chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
☒N verify (what is checkY☒N ?)

Structure

edit

Unlike molecular TiCl4, solid ZrCl4 adopts a polymeric structure wherein each Zr is octahedrally coordinated. This difference in structures is responsible for the disparity in their properties: TiCl
4
is distillable, but ZrCl
4
is a solid. In the solid state, ZrCl4 adopts a tape-like linear polymeric structure—the same structure adopted by HfCl4. This polymer degrades readily upon treatment with Lewis bases, which cleave the Zr-Cl-Zr linkages.[4]

Synthesis

edit

This conversion entails treatment of zirconium oxide with carbon in the presence of chlorine at high temperature:

ZrO2 + 2 C + 2 Cl2 → ZrCl4 + 2 CO

A laboratory scale process uses carbon tetrachloride in place of carbon and chlorine:[5]

ZrO2 + 2 CCl4 → ZrCl4 + 2 COCl2

Applications

edit

Precursor to zirconium metal

edit

ZrCl4 is an intermediate in the conversion of zirconium minerals to metallic zirconium by the Kroll process. In nature, zirconium minerals usually exist as oxides (reflected also by the tendency of all zirconium chlorides to hydrolyze). For their conversion to bulk metal, these refractory oxides are first converted to the tetrachloride, which can be distilled at high temperatures. The purified ZrCl4 can be reduced with Zr metal to produce zirconium(III) chloride.

Other uses

edit

ZrCl4 is the most common precursor for chemical vapor deposition of zirconium dioxide and zirconium diboride.[6]

In organic synthesis zirconium tetrachloride is used as a weak Lewis acid for the Friedel-Crafts reaction, the Diels-Alder reaction and intramolecular cyclisation reactions.[7] It is also used to make water-repellent treatment of textiles and other fibrous materials.

Properties and reactions

edit

Hydrolysis of ZrCl4 gives the hydrated hydroxy chloride cluster called zirconyl chloride. This reaction is rapid and virtually irreversible, consistent with the high oxophilicity of zirconium(IV). For this reason, manipulations of ZrCl4 typically require air-free techniques.

ZrCl4 is the principal starting compound for the synthesis of many organometallic complexes of zirconium.[8] Because of its polymeric structure, ZrCl4 is usually converted to a molecular complex before use. It forms a 1:2 complex with tetrahydrofuran: CAS [21959-01-3], mp 175–177 °C.[9] Sodium cyclopentadienide (NaC5H5) reacts with ZrCl4(THF)2 to give zirconocene dichloride, ZrCl2(C5H5)2, a versatile organozirconium complex.[10] One of the most curious properties of ZrCl4 is its high solubility in the presence of methylated benzenes, such as durene. This solubilization arises through the formation of π-complexes.[11]

The log (base 10) of the vapor pressure of zirconium tetrachloride (from 480 to 689 K) is given by the equation: log10(P) = −5400/T + 11.766, where the pressure is measured in torrs and temperature in kelvins. The log (base 10) of the vapor pressure of solid zirconium tetrachloride (from 710 to 741 K) is given by the equation log10(P) = −3427/T + 9.088. The pressure at the melting point is 14,500 torrs.[12]

References

edit
  1. ^ "Zirconium compounds (as Zr)". Immediately Dangerous to Life or Health Concentrations (IDLH). National Institute for Occupational Safety and Health (NIOSH).
  2. ^ GHS: PubChem
  3. ^ "New Environment Inc. - NFPA Chemicals". newenv.com. Retrieved 26 April 2017.
  4. ^ N. N. Greenwood & A. Earnshaw, Chemistry of the Elements (2nd ed.), Butterworth-Heinemann, Oxford, 1997.
  5. ^ Hummers, W. S.; Tyree, S. Y.; Yolles, S. (1953). "Zirconium and Hafnium Tetrachlorides". Inorganic Syntheses. Vol. IV. McGraw-Hill Book Company, Inc. p. 121. doi:10.1002/9780470132357.ch41. ISBN 978-0-470-13235-7.
  6. ^ Randich, E. (1 November 1979). "Chemical vapor deposited borides of the form (Ti,Zr)B2 and (Ta,Ti)B2". Thin Solid Films. 63 (2): 309–313. Bibcode:1979TSF....63..309R. doi:10.1016/0040-6090(79)90034-8.
  7. ^ Bora U. (2003). "Zirconium Tetrachloride". Synlett (7): 1073–1074. doi:10.1055/s-2003-39323.
  8. ^ Ilan Marek, ed. (2005). New Aspects of Zirconium Containing Organic Compounds. Topics in Organometallic Chemistry. Vol. 10. Springer: Berlin, Heidelberg, New York. doi:10.1007/b80198. ISBN 978-3-540-22221-7. ISSN 1436-6002.
  9. ^ L. E. Manzer; Joe Deaton (1982). "31. Tetragtdrfuran Complexes of Selected Early Transition Metals". Inorganic Syntheses. Vol. 21. pp. 135–140. doi:10.1002/9780470132524.ch31. ISBN 978-0-470-13252-4.
  10. ^ Wilkinson, G.; Birmingham, J. G. (1954). "Bis-cyclopentadienyl Compounds of Ti, Zr, V, Nb and Ta". J. Am. Chem. Soc. 76 (17): 4281–4284. doi:10.1021/ja01646a008.
  11. ^ Musso, F.; Solari, E.; Floriani, C.; Schenk, K. (1997). "Hydrocarbon Activation with Metal Halides: Zirconium Tetrachloride Catalyzing the Jacobsen Reaction and Assisting the Trimerization of Alkynes via the Formation of η6-Arene-Zirconium(IV) Complexes". Organometallics. 16 (22): 4889–4895. doi:10.1021/om970438g.
  12. ^ Palko, A. A.; Ryon, A. D.; Kuhn, D. W. (March 1958). "The Vapor Pressures of Zirconium Tetrachloride and Hafnium Tetrachloride". J. Phys. Chem. 62 (3): 319–322. doi:10.1021/j150561a017. hdl:2027/mdp.39015086513051.