Cobalt(II) bromide (CoBr2) is an inorganic compound. In its anhydrous form, it is a green solid that is soluble in water, used primarily as a catalyst in some processes.
Structure of cobalt(II) bromide tetrahydrate
| |
Crystal structure of cobalt(II) bromide
| |
Anhydrous cobalt(II) bromide in a vial
| |
Identifiers | |
---|---|
3D model (JSmol)
|
|
ChemSpider | |
ECHA InfoCard | 100.029.242 |
EC Number |
|
PubChem CID
|
|
RTECS number |
|
UNII | |
UN number | 3077 |
CompTox Dashboard (EPA)
|
|
| |
| |
Properties | |
CoBr2, CoBr2.6H2O, CoBr2.2H2O | |
Molar mass | 218.7412 g/mol (anhydrous) 326.74 g/mol (hexahydrate) |
Appearance | Bright green crystals (anhydrous) Red-purple crystals (hexahydrate) |
Density | 4.909 g/cm3 (anhydrous) 2.46 g/cm3 (hexahydrate) |
Melting point | 678 °C (1,252 °F; 951 K) (anhydrous) 47 °C (hexahydrate) |
anhydrous: 66.7 g/100 mL (59 °C) 68.1 g/100 mL (97 °C) hexahydrate: 113.2 g/100 mL (20 °C) | |
Solubility | 77.1 g/100 mL (ethanol, 20 °C) 58.6 g/100 mL (methanol, 30 °C) soluble in methyl acetate, ether, alcohol, acetone |
+13000·10−6 cm3/mol | |
Structure | |
Rhombohedral, hP3, SpaceGroup = P-3m1, No. 164 | |
octahedral | |
Hazards | |
GHS labelling: | |
Danger | |
H302, H312, H315, H317, H319, H332, H334, H335, H350 | |
P201, P202, P261, P264, P270, P271, P272, P280, P281, P285, P301+P312, P302+P352, P304+P312, P304+P340, P304+P341, P305+P351+P338, P308+P313, P312, P321, P322, P330, P332+P313, P333+P313, P337+P313, P342+P311, P362, P363, P403+P233, P405, P501 | |
NFPA 704 (fire diamond) | |
Flash point | Non-flammable |
Lethal dose or concentration (LD, LC): | |
LD50 (median dose)
|
406 mg/kg (oral, rat) |
Safety data sheet (SDS) | Fisher Scientific |
Related compounds | |
Other anions
|
cobalt(II) fluoride cobalt(II) chloride cobalt(II) iodide |
Other cations
|
iron(II) bromide nickel(II) bromide |
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
|
Properties
editWhen anhydrous, cobalt(II) bromide appears as green crystals. It is hygroscopic and eventually forms the hexahydrate in air,[1] which appears as red-purple crystals. The hexahydrate loses four water of crystallization molecules at 100 °C forming the dihydrate:
- CoBr2·6H2O → CoBr2·2H2O + 4 H2O
Further heating to 130 °C produces the anhydrous form:
- CoBr2·2H2O → CoBr2 + 2 H2O
The anhydrous form melts at 678 °C.[2][3] At higher temperatures, cobalt(II) bromide reacts with oxygen, forming cobalt(II,III) oxide and bromine vapor.
The tetrahydrate is molecular, with the formula trans-[CoBr2(H2O)4].[4]
Preparation and reactions
editCobalt(II) bromide can be prepared as a hydrate by the reaction of cobalt hydroxide with hydrobromic acid:
- Co(OH)2 + 2HBr → CoBr2·6H2O
The classical coordination compound bromopentaamminecobalt(III) bromide is prepared by oxidation of an aqueous solution of cobalt(II) bromide and ammonia.[5]
- 2 CoBr2 + 8 NH3 + 2 NH4Br + H2O2 → 2 [Co(NH3)5Br]Br2 + 2 H2O
Triphenylphosphine complexes of cobalt(II) bromide have been used as a catalysts in organic synthesis.[citation needed]
Safety
editExposure to large amounts of cobalt(II) can cause cobalt poisoning.[6] Bromide is also mildly toxic.
References
edit- ^ Perry, Dale L. (2011). Handbook of Inorganic Compounds (2nd ed.). Boca Raton: Taylor & Francis. p. 130. ISBN 978-1-4398-1461-1. OCLC 587104373.
- ^ Cobalt Bromide Supplier & Tech Info American Elements
- ^ WebElements Periodic Table of the Elements
- ^ Waizumi, Kenji; Masuda, Hideki; Ohtaki, Hitoshi (1992). "X-ray Structural Studies of FeBr2·4H2O, CoBr2·4H2O, NiCl2·4H2O and CuBr2·4H2O. Cis/Trans Selectivity in Transition Metal(II) Dihalide Tetrahydrate". Inorganica Chimica Acta. 192 (2): 173–181. doi:10.1016/S0020-1693(00)80756-2.
- ^ Diehl, Harvey; Clark, Helen; Willard, H. H.; Bailar, John C. (1939). "Bromopentamminocobalti Bromide". Inorganic Syntheses. Vol. 1. p. 186. doi:10.1002/9780470132326.ch66. ISBN 978-0-470-13232-6.
- ^ "Cobalt Bromide (OUS)" (PDF). Archived from the original (PDF) on 2007-06-25. Retrieved 2008-04-10.