Wikipedia

Cycloparaphenylene

A cycloparaphenylene is a molecule that consists of several benzene rings connected by covalent bonds in the para positions to form a hoop- or necklace-like structure. Its chemical formula is [C6H4]n or C
6nH
4n Such a molecule is usually denoted [n]CPP where n is the number of benzene rings.

Interactive 3D model of [5]cycloparaphenylene
Space-filling model of an [8]cycloparaphenylene molecule.
An "armchair" carbon nanotube and a cycloparaphenylene molecule.[1]

A cycloparaphenylene can be considered as the smallest possible armchair carbon nanotube, and is a type of carbon nanohoop.[2] Cycloparaphenylenes are challenging targets for chemical synthesis due to the ring strain incurred from forcing benzene rings out of planarity.

History

edit

In 1934 by V. C. Parekh and P. C. Guha described the first published attempt to synthesize a cycloparaphenylene, specifically [2]CPP. They connected two aromatic rings with a sulfide bridge, and hoped that removal of the latter would yield the desired compound. However, the attempt failed as the compound would have been far too strained to exist under anything but extreme conditions.[3]

 
First attempts at a CPP[4]

By 1993, Fritz Vögtle attempted to synthesize the less-strained [6]CPP and [8]CPP by the same approach. He produced a hoop of phenyl rings, bridged together by a sulfur atom. However, his attempts to remove the sulfur failed too. They also synthesized a macrocycle that upon dehydrogenation would yield a CPP, but could not perform this final step.[5][4]

In the year 2000, Chandrasekhar and others concluded, by computational analysis, that [5]CPP and [6]CPP should be significantly different in their aromaticity.[6] However, the synthesis in 2014 of [5]CPP refuted this conclusion.[1][7][8][9]

In 2008 the first cycloparaphenylenes were synthesized by Ramesh Jasti during his post doctoral research in the lab of Carolyn Bertozzi. He used cyclohexa-1,4-dienes which are closer in oxidation state to the desired phenylene than the cyclohexanes used previously by Vögtle. The first cycloparaphenylenes that were reported and characterized were: [9]CPP, [12]CPP, and [18]CPP.[10] In 2009, the Itami group would report the selective synthesis of [12]CPP, and shortly thereafter Yamago synthesized [8]CPP in 2010.[11][12] The Jasti Group then synthesized all increasingly smaller CPPs using new methodology that allowed [7]CPP,[13] [6]CPP,[14] and finally [5]CPP[1] to be reported in relatively quick succession.[citation needed]

Properties

edit

Structure

edit

The normal configuration of each phenylene element would be planar, with the bonds in the para position pointing opposite to each other in a straight line.[citation needed] Therefore, the cycloparaphenylene molecule is strained, and the strain increases as the number of units decreases.[citation needed] The strain energy of [5]CPP was calculated as 117.2 kcal/mol. In spite of the strain, the phenyl rings retain their aromatic character, even in the [5]CPP.[1][15] However, as the size of the CPP decreases the HOMO-LUMO gap also decreases. This trend opposite to that observed in linear polyparaphenylenes where the HOMO-LUMO gap decreases as size increases.[9][12] This causes a red-shift of the fluorescent emission.[9]

Solid-state packing

edit

Cycloparaphenylenes with 7 to 12 rings all adopt a herringbone-like packing in the solid state. A similar but denser structure was observed for [5]CPP, whereas [6]CPP forms columns.[14] This columnar packing structure has been of interest due to a potentially high internal surface area. By partial fluorination, it was found that this packing geometry could be engineered.[16]

Synthesis

edit

There are three main methods used for cycloparaphenylene synthesis.

Suzuki Coupling of Curved Oligophenylene Precursors

edit

In the initial synthesis, cycloparaphenylenes with n = 9, 12, and 18 have been synthesized starting from macrocycles containing 1,4-syn-dimethoxy-2,5-cyclohexadiene units as masked aromatic rings. Lithium–halogen exchange with p-diiodobenzene followed by a two-fold nucleophilic addition reaction with 1,4-benzoquinone yielded a syn-cyclohexadiene moiety. Borylation of this material followed macrocyclization under Suzuki–Miyuara cross-coupling with an equivalent of the diiodide produced macrocycles in low yields which could be separated by column chromatography. These macrocycles were then reductively aromatized using sodium naphthalenide to yield [n]cycloparaphenylenes. Since this initial synthesis uses symmetric building blocks it is challenging to use it to make smaller CPPs. Therefore, instead of benzoquinone, benzoquinone monomethyl ketal was used to allow the use of asymmetric building blocks. This innovation allowed the selective synthesis of [12]CPP to [5]CPP.[17]

[5]CPP is synthesized with an intramolecular boronate homocoupling technique that was originally seen as an undesired by-product of Suzuki-Miyaura cross-coupling reactions in the synthesis of [10]CPP.[1][15] Cycloparaphenylenes now have selective, modular, and high yielding synthetic pathways.[citation needed]

Reductive Elimination of Platinum Macrocycles

edit

A quicker route to [8-13]CPPs starts by selectively building [8]CPP and [12]CPP from the reaction of 4,4′-bis(trimethylstannyl)biphenyl and 4,4′ ′-bis(trimethylstannyl)terphenyl, respectively, with Pt(cod)Cl2 (where cod is 1,5-cyclooctadiene) through square-shaped tetranuclear platinum intermediates.[12] A mixture of [8-13]cycloparaphenylenes can be obtained in good combined yields by mixing biphenyl and terphenyl precursors with the platinum sources.[12]

[2+2+2]Cycloaddition of Alkynes

edit

A third method for the synthesis of cycloparaphenylenes developed in the Wegner group is based on rhodium-catalyzed [2+2+2]cycloadditions of substituted alkynes.[18] The method has been further investigated by the Tanaka group, which have used the rhodium-catalysed cyclotrimerisation of alkynes as a core strategy.[19][20]

Potential applications

edit

Potential applications of cycloparaphenylenes include host–guest chemistry,[10] seeds for carbon nanotube growth, and hybrid nanostructures containing nanohoop-type substituents.[21] A cycloparaphenylene can be seen as minimal single-walled carbon nanotube of the armchair type. As such, a cycloparaphenylene may be a seed for synthesis of longer nanotubes.[10][12][22] Their electronic properties may also be useful.[23][24]

Fullerene binding

edit

Cycloparaphenylenes have shown affinity to fullerenes and other carbonaceous molecules,[10] with interactions similar to those in carbon peapods. Potential applications of these structures include nanolasers, single electron transistors, spin-qubit arrays for quantum computing, nanopipettes, and data storage devices.[25][26][27]

Specifically, the π-π interactions and the concave interior of the cycloparaphenylenes is expected to bind to π conjugated systems with convex surfaces that can fit inside the ring. Indeed, [10]CPP has been shown to selectively bind a C60 fullerene within its hole, thus producing a "molecular bearing".[10] The fullerene remains in the ring long enough to be observed on the NMR timescale.[28] The fluorescence of [10]CPP is quenched upon complexation with C60, which suggests its potential as a C60 sensor.[10] In 2018 this affinity was exploited to create CPP-fullerene rotaxanes.[29]

It has been observed that such "ball-in-hoop" interactions are stronger for endohedral metallo-fullerenes, in which a positively charged metal ion is trapped inside a fullerene cage and makes it more electronegative.[30][22] Specifically, [12]CPP was found to preferentially enclose metallo-fullerenes instead of "empty" fullerenes, reducing their solubility in toluene; which provides a convenient separation method for the two species.[28]

edit

As the synthesis of CPPs has become easier, derivative structures have begun to be synthesized as well. In 2013 the Itami group reported the synthesis of a nanocage made completely of benzene rings. This compound was especially interesting because it could be viewed as a junction of a branched nanotube structure.[31]

Other chiral derivatives of cycloparaphenylenes (which may serve as chemical templates for synthesizing chiral nanotubes) have also been characterized. Similar to the original (n,n) cycloparaphenylenes, these chiral nanorings also exhibit unusual optoelectronic properties with excitation energies growing larger as a function of size; however, the (n+3,n+1) chiral nanoring exhibits larger photoinduced transitions compared to the original (n,n) cycloparaphenylenes, resulting in more readily observable optical properties in spectroscopic experiments.[32]

In 2012 the Jasti Group reported the synthesis of dimers of [8]CPP linked by arene bridges.[33] This synthesis was followed two years later by the synthesis of a directly connected dimer of [10]CPP from chloro[10]CPP by the Itami group.[34]

Donor–acceptor functionalization

edit

CPPs are unique in that their donor–acceptor properties can be adjusted with the addition or removal of each phenyl ring. In the all-carbon nano-hoop systems a reduction in width corresponds to a higher HOMO and a lower LUMO. Additional donor–acceptor selectivity was observed by the addition of an aromatic heterocycles into the larger ring. N-methylaza[n]CPP showed that a lowering of the LUMO could be enhanced by decreasing the ring size, while the HOMO energy level remained the same.[35]

References

edit
  1. ^ a b c d e Evans, Paul J.; Darzi, Evan R.; Jasti, Ramesh (May 2014). "Efficient room-temperature synthesis of a highly strained carbon nanohoop fragment of buckminsterfullerene". Nature Chemistry. 6 (5): 404–408. Bibcode:2014NatCh...6..404E. doi:10.1038/nchem.1888. ISSN 1755-4349. PMID 24755591.
  2. ^ "Carbon Nanohoops: Molecular Templates for Precision Nanotube Synthesis". 19 August 2014.
  3. ^ Parekh, V.C.; Guha, P.C. (1934). "Synthesis of p,p'-diphenylene disulfide". Journal of Indian Chemical Society. 11: 95–100.
  4. ^ a b Friederich, Rolf; Nieger, Martin; Vögtle, Fritz (1993-07-01). "Auf dem Weg zu makrocyclischen para-Phenylenen (On The Way to Macrocyclic Paraphenylenes)". Chemische Berichte. 126 (7): 1723–1732. doi:10.1002/cber.19931260732. ISSN 1099-0682.
  5. ^ Miyahara, Yuji; Inazu, Takahiko; Yoshino, Tamotsu (1983). "Synthesis of [1.1.1.1]paracylophane". Tetrahedron Letters. 24 (47): 5277–5280. doi:10.1016/s0040-4039(00)88416-6.
  6. ^ Jagadeesh, Mavinahalli N.; Makur, Anindita; Chandrasekhar, Jayaraman (2000-02-01). "The Interplay of Angle Strain and Aromaticity: Molecular and Electronic Structures of [0n]Paracyclophanes" (PDF). Molecular Modeling Annual. 6 (2): 226–233. doi:10.1007/s0089400060226. ISSN 0949-183X. S2CID 55092879.
  7. ^ Bodwell, Graham J. (May 2014). "Closing the loop". Nature Chemistry. 6 (5): 383–385. doi:10.1038/nchem.1932. ISSN 1755-4349. PMID 24755587.
  8. ^ Kayahara, Eiichi; Patel, Vijay Kumar; Yamago, Shigeru (2014-02-12). "Synthesis and Characterization of [5]Cycloparaphenylene". Journal of the American Chemical Society. 136 (6): 2284–2287. doi:10.1021/ja413214q. ISSN 0002-7863. PMID 24460371.
  9. ^ a b c Wong, Bryan M. (2009-12-31). "Optoelectronic Properties of Carbon Nanorings: Excitonic Effects from Time-Dependent Density Functional Theory". The Journal of Physical Chemistry C. 113 (52): 21921–21927. arXiv:0912.4707. doi:10.1021/jp9074674. ISSN 1932-7447. PMC 3317592. PMID 22481999.
  10. ^ a b c d e f Iwamoto, Takahiro; Watanabe, Yoshiki; Sadahiro, Tatsuya; Haino, Takeharu; Yamago, Shigeru (2011). "Size‐Selective Encapsulation of C60 by [10]Cycloparaphenylene: Formation of the Shortest Fullerene‐Peapod". Angewandte Chemie. 50 (36): 8342–8344. doi:10.1002/anie.201102302. ISSN 1521-3773. PMID 21770005.
  11. ^ Yamago, Shigeru; Watanabe, Yoshiki; Iwamoto, Takahiro (2010-01-18). "Synthesis of [8]Cycloparaphenylene from a Square-Shaped Tetranuclear Platinum Complex". Angewandte Chemie International Edition. 49 (4): 757–759. doi:10.1002/anie.200905659. ISSN 1521-3773. PMID 20014269.
  12. ^ a b c d e Iwamoto, Takahiro; Watanabe, Yoshiki; Sakamoto, Youichi; Suzuki, Toshiyasu; Yamago, Shigeru (2011-06-01). "Selective and Random Syntheses of [n]Cycloparaphenylenes (n = 8–13) and Size Dependence of Their Electronic Properties". Journal of the American Chemical Society. 133 (21): 8354–8361. doi:10.1021/ja2020668. ISSN 0002-7863. PMID 21542589.
  13. ^ Sisto, Thomas J.; Golder, Matthew R.; Hirst, Elizabeth S.; Jasti, Ramesh (2011). "Selective Synthesis of Strained [7]Cycloparaphenylene: An Orange-Emitting Fluorophore". Journal of the American Chemical Society. 133 (40): 15800–15802. doi:10.1021/ja205606p. PMID 21913694.
  14. ^ a b Xia, Jianlong; Jasti, Ramesh (2012). "Synthesis, Characterization, and Crystal Structure of [6]Cycloparaphenylene". Angewandte Chemie International Edition. 51 (10): 2474–2476. doi:10.1002/anie.201108167. ISSN 1521-3773. PMID 22287256.
  15. ^ a b Omachi, Haruka; Matsuura, Sanae; Segawa, Yasutomo; Itami, Kenichiro (2010-12-27). "A Modular and Size-Selective Synthesis of [n]Cycloparaphenylenes: A Step toward the Selective Synthesis of [n,n] Single-Walled Carbon Nanotubes". Angewandte Chemie International Edition. 49 (52): 10202–10205. doi:10.1002/anie.201005734. ISSN 1521-3773. PMID 21105035.
  16. ^ Leonhardt, Erik J.; Van Raden, Jeff M.; Miller, David; Zakharov, Lev N.; Alemán, Benjamín; Jasti, Ramesh (2018). "A Bottom-Up Approach to Solution-Processed, Atomically Precise Graphitic Cylinders on Graphite". Nano Letters. 18 (12): 7991–7997. Bibcode:2018NanoL..18.7991L. doi:10.1021/acs.nanolett.8b03979. PMID 30480454. S2CID 53754770.
  17. ^ Darzi, Evan R.; Sisto, Thomas J.; Jasti, Ramesh (2012). "Selective Syntheses of [7]–[12]Cycloparaphenylenes Using Orthogonal Suzuki–Miyaura Cross-Coupling Reactions". The Journal of Organic Chemistry. 77 (15): 6624–6628. doi:10.1021/jo3011667. PMID 22804729.
  18. ^ Tran-Van, Anne-Florence; Huxol, Elena; Basler, Jonathan M.; Neuburger, Markus; Adjizian, Jean-Joseph; Ewels, Chris P.; Wegner, Hermann A. (2014-03-21). "Synthesis of Substituted [8]Cycloparaphenylenes by [2 + 2 + 2] Cycloaddition". Organic Letters. 16 (6): 1594–1597. doi:10.1021/ol500194s. ISSN 1523-7060.
  19. ^ Hayase, Norihiko; Miyauchi, Yuta; Aida, Yukimasa; Sugiyama, Haruki; Uekusa, Hidehiro; Shibata, Yu; Tanaka, Ken (2017). "Synthesis of [8]Cycloparaphenylene-octacarboxylates via Rh-Catalyzed Stepwise Cross-Alkyne Cyclotrimerization". Organic Letters. 19 (11): 2993–2996. doi:10.1021/acs.orglett.7b01231. PMID 28513181.
  20. ^ Kohrs, Daniel; Volkmann, Jannis; Wegner, Hermann A. (2022-07-05). "Cycloparaphenylenes via [2+2+2] cycloaddition". Chemical Communications. 58 (54): 7483–7494. doi:10.1039/D2CC02289C. ISSN 1364-548X.
  21. ^ Li, Penghao; Zakharov, Lev N.; Jasti, Ramesh (2017-05-02). "A Molecular Propeller with Three Nanohoop Blades: Synthesis, Characterization, and Solid-State Packing". Angewandte Chemie International Edition. 56 (19): 5237–5241. doi:10.1002/anie.201700935. ISSN 1521-3773. PMID 28374422.
  22. ^ a b Lewis, Simon E. (2015-04-10). "Cycloparaphenylenes and related nanohoops". Chemical Society Reviews. 44 (8): 2221–2304. doi:10.1039/c4cs00366g. ISSN 1460-4744. PMID 25735813.
  23. ^ Golder, Matthew R.; Wong, Bryan M.; Jasti, Ramesh (2013-09-30). "Photophysical and theoretical investigations of the [8]cycloparaphenylene radical cation and its charge-resonance dimer". Chemical Science. 4 (11): 4285. doi:10.1039/C3SC51861B. ISSN 2041-6539.
  24. ^ Zabula, Alexander V.; Filatov, Alexander S.; Xia, Jianlong; Jasti, Ramesh; Petrukhina, Marina A. (2013-05-03). "Tightening of the Nanobelt upon Multielectron Reduction". Angewandte Chemie International Edition. 52 (19): 5033–5036. doi:10.1002/anie.201301226. ISSN 1521-3773. PMID 23564669.
  25. ^ Service, Robert F. (2001-04-06). "Nanotube 'Peapods' Show Electrifying Promise". Science. 292 (5514): 45. doi:10.1126/science.292.5514.45. ISSN 0036-8075. PMID 11294210. S2CID 33284325.
  26. ^ Kwon, Young-Kyun (1999). ""Bucky Shuttle" Memory Device: Synthetic Approach and Molecular Dynamics Simulations". Physical Review Letters. 82 (7): 1470–1473. Bibcode:1999PhRvL..82.1470K. doi:10.1103/physrevlett.82.1470.
  27. ^ Utko, Pawel; Nygård, Jesper; Monthioux, Marc; Noé, Laure (2006). "Sub-Kelvin transport spectroscopy of fullerene peapod quantum dots". Applied Physics Letters. 89 (23): 233118. Bibcode:2006ApPhL..89w3118U. doi:10.1063/1.2403909. S2CID 120800423.
  28. ^ a b Matsuno, Taisuke; Kamata, Sho; Hitosugi, Shunpei; Isobe, Hiroyuki (2013-07-02). "Bottom-up synthesis and structures of π-lengthened tubular macrocycles". Chemical Science. 4 (8): 3179. doi:10.1039/c3sc50645b. ISSN 2041-6539. S2CID 98409330.
  29. ^ Xu, Youzhi; Kaur, Ramandeep; Wang, Bingzhe; Minameyer, Martin; Gsänger, Sebastian; Meyer, Bernd; Drewello, Thomas; Guldi, Dirk; von Delius, Max (20 September 2018). "Concave–Convex π–π Template Approach Enables the Synthesis of [10]Cycloparaphenylene–Fullerene [2]Rotaxanes". Journal of the American Chemical Society. 140 (41): 13413–20. doi:10.1021/jacs.8b08244. PMID 30234982. S2CID 207194425.
  30. ^ Iwamoto, Takahiro; Slanina, Zdenek; Mizorogi, Naomi; Guo, Jingdong; Akasaka, Takeshi; Nagase, Shigeru; Takaya, Hikaru; Yasuda, Nobuhiro; Kato, Tatsuhisa (2014-10-27). "Partial Charge Transfer in the Shortest Possible Metallofullerene Peapod, La@C82⊂[11]Cycloparaphenylene". Chemistry – A European Journal. 20 (44): 14403–14409. doi:10.1002/chem.201403879. ISSN 1521-3765. PMID 25224281.
  31. ^ Matsui, Katsuma; Segawa, Yasutomo; Namikawa, Tomotaka; Kamada, Kenji; Itami, Kenichiro (2012-11-29). "Synthesis and properties of all-benzene carbon nanocages: a junction unit of branched carbon nanotubes". Chem. Sci. 4 (1): 84–88. doi:10.1039/c2sc21322b. ISSN 2041-6539.
  32. ^ Wong, Bryan M.; Lee, Jonathan W. (2011-11-03). "Anomalous Optoelectronic Properties of Chiral Carbon Nanorings…and One Ring to Rule Them All". The Journal of Physical Chemistry Letters. 2 (21): 2702–2706. arXiv:1110.2756. doi:10.1021/jz2012534. ISSN 1948-7185. PMC 4047598. PMID 24920994.
  33. ^ Xia, Jianlong; Golder, Matthew R.; Foster, Michael E.; Wong, Bryan M.; Jasti, Ramesh (2012-12-05). "Synthesis, Characterization, and Computational Studies of Cycloparaphenylene Dimers". Journal of the American Chemical Society. 134 (48): 19709–19715. doi:10.1021/ja307373r. ISSN 0002-7863. PMID 23130993.
  34. ^ Ishii, Yuuki; Matsuura, Sanae; Segawa, Yasutomo; Itami, Kenichiro (2014-04-18). "Synthesis and Dimerization of Chloro[10]cycloparaphenylene: A Directly Connected Cycloparaphenylene Dimer". Organic Letters. 16 (8): 2174–2176. doi:10.1021/ol500643c. ISSN 1523-7060. PMID 24689496.
  35. ^ Van Raden, J. M.; Darzi, E. R.; Zakharov, L. N.; Jasti, R. (2016-06-15). "Synthesis and characterization of a highly strained donor–acceptor nanohoop". Organic & Biomolecular Chemistry. 14 (24): 5721–5727. doi:10.1039/c6ob00133e. ISSN 1477-0539. PMID 26881906.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Cycloparaphenylene&oldid=1256728576"