Wikipedia

Protein pKa calculations

In computational biology, protein pKa calculations are used to estimate the pKa values of amino acids as they exist within proteins. These calculations complement the pKa values reported for amino acids in their free state, and are used frequently within the fields of molecular modeling, structural bioinformatics, and computational biology.

Amino acid pKa values

edit

pKa values of amino acid side chains play an important role in defining the pH-dependent characteristics of a protein. The pH-dependence of the activity displayed by enzymes and the pH-dependence of protein stability, for example, are properties that are determined by the pKa values of amino acid side chains.

The pKa values of an amino acid side chain in solution is typically inferred from the pKa values of model compounds (compounds that are similar to the side chains of amino acids). See Amino acid for the pKa values of all amino acid side chains inferred in such a way. There are also numerous experimental studies that have yielded such values, for example by use of NMR spectroscopy.

The table below lists the model pKa values that are often used in a protein pKa calculation, and contains a third column based on protein studies.[1]

Amino Acid pKa pKa
Asp (D) 3.9 4.00
Glu (E) 4.3 4.4
Arg (R) 12.0 13.5
Lys (K) 10.5 10.4
His (H) 6.08 6.8
Cys (C) (–SH) 8.28 8.3
Tyr (Y) 10.1 9.6
N-term 8.0
C-term 3.6

The effect of the protein environment

edit
 
Coupled system consisting of three acids. The black curve shows a back-titration event

When a protein folds, the titratable amino acids in the protein are transferred from a solution-like environment to an environment determined by the 3-dimensional structure of the protein. For example, in an unfolded protein, an aspartic acid typically is in an environment which exposes the titratable side chain to water. When the protein folds, the aspartic acid could find itself buried deep in the protein interior with no exposure to solvent.

Furthermore, in the folded protein, the aspartic acid will be closer to other titratable groups in the protein and will also interact with permanent charges (e.g. ions) and dipoles in the protein. All of these effects alter the pKa value of the amino acid side chain, and pKa calculation methods generally calculate the effect of the protein environment on the model pKa value of an amino acid side chain.[2][3][4][5]

Typically, the effects of the protein environment on the amino acid pKa value are divided into pH-independent effects and pH-dependent effects. The pH-independent effects (desolvation, interactions with permanent charges and dipoles) are added to the model pKa value to give the intrinsic pKa value. The pH-dependent effects cannot be added in the same straightforward way and have to be accounted for using Boltzmann summation, Tanford–Roxby iterations or other methods.

The interplay of the intrinsic pKa values of a system with the electrostatic interaction energies between titratable groups can produce quite spectacular effects such as non-Henderson–Hasselbalch titration curves and even back-titration effects.[6]

The image on the right shows a theoretical system consisting of three acidic residues. One group is displaying a back-titration event (blue group).

pKa calculation methods

edit

Several software packages and webserver are available for the calculation of protein pKa values.

Using the Poisson–Boltzmann equation

edit

Some methods are based on solutions to the Poisson–Boltzmann equation (PBE), often referred to as FDPB-based methods (FDPB stands for "finite difference Poisson–Boltzmann"). The PBE is a modification of Poisson's equation that incorporates a description of the effect of solvent ions on the electrostatic field around a molecule.

The H++ web server,[7] the pKD webserver,[8] MCCE2, Karlsberg+,[dead link] PETIT and GMCT use the FDPB method to compute pKa values of amino acid side chains.

FDPB-based methods calculate the change in the pKa value of an amino acid side chain when that side chain is moved from a hypothetical fully solvated state to its position in the protein. To perform such a calculation, one needs theoretical methods that can calculate the effect of the protein interior on a pKa value, and knowledge of the pKa values of amino acid side chains in their fully solvated states.[2][3][4][5]

Empirical methods

edit

A set of empirical rules relating the protein structure to the pKa values of ionizable residues have been developed by Li, Robertson, and Jensen.[9] These rules form the basis for the web-accessible program called PROPKA for rapid predictions of pKa values. A recent empirical pKa prediction program was released by Tan KP et.al. with the online server DEPTH web server.[10]

Molecular dynamics (MD)-based methods

edit

Molecular dynamics methods of calculating pKa values make it possible to include full flexibility of the titrated molecule.[11][12][13]

Molecular dynamics based methods are typically much more computationally expensive, and not necessarily more accurate, ways to predict pKa values than approaches based on the Poisson–Boltzmann equation. Limited conformational flexibility can also be realized within a continuum electrostatics approach, e.g., for considering multiple amino acid sidechain rotamers. In addition, current commonly used molecular force fields do not take electronic polarizability into account, which could be an important property in determining protonation energies.

Determining pKa values from titration curves or free energy calculations

edit

From the titration of protonatable group, one can read the so-called pKa1⁄2 which is equal to the pH value where the group is half-protonated (i.e. when 50% such groups would be protonated). The pKa1⁄2 is equal to the Henderson–Hasselbalch pKa (pKHH
a) if the titration curve follows the Henderson–Hasselbalch equation.[14] Most pKa calculation methods silently assume that all titration curves are Henderson–Hasselbalch shaped, and pKa values in pKa calculation programs are therefore often determined in this way. In the general case of multiple interacting protonatable sites, the pKa1⁄2 value is not thermodynamically meaningful. In contrast, the Henderson–Hasselbalch pKa value can be computed from the protonation free energy via

 

and is thus in turn related to the protonation free energy of the site via

 

The protonation free energy can in principle be computed from the protonation probability of the group ⟨x⟩(pH) which can be read from its titration curve

 

Titration curves can be computed within a continuum electrostatics approach with formally exact but more elaborate analytical or Monte Carlo (MC) methods, or inexact but fast approximate methods. MC methods that have been used to compute titration curves[15] are Metropolis MC[16][17] or Wang–Landau MC.[18] Approximate methods that use a mean-field approach for computing titration curves are the Tanford–Roxby method and hybrids of this method that combine an exact statistical mechanics treatment within clusters of strongly interacting sites with a mean-field treatment of intercluster interactions.[19][20][21][22][23]

In practice, it can be difficult to obtain statistically converged and accurate protonation free energies from titration curves if ⟨x⟩ is close to a value of 1 or 0. In this case, one can use various free energy calculation methods to obtain the protonation free energy[15] such as biased Metropolis MC,[24] free-energy perturbation,[25][26] thermodynamic integration,[27][28][29] the non-equilibrium work method[30] or the Bennett acceptance ratio method.[31]

Note that the pKHH
a value does in general depend on the pH value.[32]

This dependence is small for weakly interacting groups like well solvated amino acid side chains on the protein surface, but can be large for strongly interacting groups like those buried in enzyme active sites or integral membrane proteins.[33][34][35]

While many protein pKa prediction methods are available, their accuracies often differ significantly due to subtle and often drastic differences in strategy. [36]

References

edit
  1. ^ Hass and Mulder (2015) Annu. Rev. Biophys. vol 44 pp. 53–75 doi 10.1146/annurev-biophys-083012-130351.
  2. ^ a b Bashford (2004) Front Biosci. vol. 9 pp. 1082–99 doi 10.2741/1187
  3. ^ a b Gunner et al. (2006) Biochim. Biophys. Acta vol. 1757 (8) pp. 942–68 doi 10.1016/j.bbabio.2006.06.005
  4. ^ a b Ullmann et al. (2008) Photosynth. Res. 97 vol. 112 pp. 33–55 doi 10.1007/s11120-008-9306-1
  5. ^ a b Antosiewicz et al. (2011) Mol. BioSyst. vol. 7 pp. 2923–2949 doi 10.1039/C1MB05170A
  6. ^ A. Onufriev, D.A. Case and G. M. Ullmann (2001). Biochemistry 40: 3413–3419 doi 10.1021/bi002740q
  7. ^ "H++ (web-based computational prediction of protonation states and pK of ionizable groups in macromolecules)". newbiophysics.cs.vt.edu. Retrieved 2023-01-26.
  8. ^ Tynan-Connolly, B. M.; Nielsen, J. E. (2006-12-22). "Redesigning protein pKa values". Protein Science. 16 (2): 239–249. doi:10.1110/ps.062538707. ISSN 0961-8368. PMC 2203286. PMID 17189477.
  9. ^ Li, Hui; Robertson, Andrew D.; Jensen, Jan H. (2005-10-17). "Very fast empirical prediction and rationalization of protein pKa values". Proteins: Structure, Function, and Bioinformatics. 61 (4): 704–721. doi:10.1002/prot.20660. PMID 16231289. S2CID 38196246.
  10. ^ Tan, Kuan Pern; Nguyen, Thanh Binh; Patel, Siddharth; Varadarajan, Raghavan; Madhusudhan, M. S. (2013-07-01). "Depth: a web server to compute depth, cavity sizes, detect potential small-molecule ligand-binding cavities and predict the pKa of ionizable residues in proteins". Nucleic Acids Research. 41 (W1): W314–W321. doi:10.1093/nar/gkt503. ISSN 1362-4962. PMC 3692129. PMID 23766289.
  11. ^ Donnini et al. (2011) J. Chem. Theory Comp. vol 7 pp. 1962–78 doi 10.1021/ct200061r.
  12. ^ Wallace et al. (2011) J. Chem. Theory Comp. vol 7 pp. 2617–2629 doi 10.1021/ct200146j.
  13. ^ Goh et al. (2012) J. Chem. Theory Comp. vol 8 pp. 36–46 doi 10.1021/ct2006314.
  14. ^ Ullmann (2003) J. Phys. Chem. B vol 107 pp. 1263–71 doi 10.1021/jp026454v.
  15. ^ a b Ullmann et al. (2012) J. Comput. Chem. vol 33 pp. 887–900 doi 10.1002/jcc.22919
  16. ^ Metropolis et al. (1953) J. Chem. Phys. vol 23 pp. 1087–1092 doi 10.1063/1.1699114
  17. ^ Beroza et al. (1991) Proc. Natl. Acad. Sci. USA vol 88 pp. 5804–5808 doi 10.1073/pnas.88.13.5804
  18. ^ Wang and Landau (2001) Phys. Rev. E vol 64 pp 056101 doi 10.1103/PhysRevE.64.056101
  19. ^ Tanford and Roxby (1972) Biochemistry vol 11 pp. 2192–2198 doi 10.1021/bi00761a029
  20. ^ Bashford and Karplus (1991) J. Phys. Chem. vol 95 pp. 9556–61 doi 10.1021/j100176a093
  21. ^ Gilson (1993) Proteins vol 15 pp. 266–82 doi 10.1002/prot.340150305
  22. ^ Antosiewicz et al. (1994) J. Mol. Biol. vol 238 pp. 415–36 doi 10.1006/jmbi.1994.1301
  23. ^ Spassov and Bashford (1999) J. Comput. Chem. vol 20 pp. 1091–1111 doi 10.1002/(SICI)1096-987X(199908)20:11<1091::AID-JCC1>3.0.CO;2-3
  24. ^ Beroza et al. (1995) Biophys. J. vol 68 pp. 2233–2250 doi 10.1016/S0006-3495(95)80406-6
  25. ^ Zwanzig (1954) J. Chem. Phys. vol 22 pp. 1420–1426 doi 10.1063/1.1740409
  26. ^ Ullmann et al. 2011 J. Phys. Chem. B. vol 68 pp. 507–521 doi 10.1021/jp1093838
  27. ^ Kirkwood (1935) J. Chem. Phys. vol 2 pp. 300–313 doi 10.1063/1.1749657
  28. ^ Bruckner and Boresch (2011) J. Comput. Chem. vol 32 pp. 1303–1319 doi 10.1002/jcc.21713
  29. ^ Bruckner and Boresch (2011) J. Comput. Chem. vol 32 pp. 1320–1333 doi 10.1002/jcc.21712
  30. ^ Jarzynski (1997) Phys. Rev. E vol pp. 2233–2250 doi 10.1103/PhysRevE.56.5018
  31. ^ Bennett (1976) J. Comput. Phys. vol 22 pp. 245–268 doi 10.1016/0021-9991(76)90078-4
  32. ^ Bombarda et al. (2010) J. Phys. Chem. B vol 114 pp. 1994–2003 doi 10.1021/jp908926w.
  33. ^ Bashford and Gerwert (1992) J. Mol. Biol. vol 224 pp. 473–86 doi 10.1016/0022-2836(92)91009-E
  34. ^ Spassov et al. (2001) J. Mol. Biol. vol 312 pp. 203–19 doi 10.1006/jmbi.2001.4902
  35. ^ Ullmann et al. (2011) J. Phys. Chem. B vol 115 pp. 10346–59 doi 10.1021/jp204644h
  36. ^ Wanlei Wei, Hervé Hogues, and Traian Sulea (2023) J. Chem. Inf. Model. vol 63, iss 16, pp. 5169–5181 [1]
edit
  • AccelrysPKA[dead link] — Accelrys CHARMm based pKa calculation
  • H++ — Poisson–Boltzmann based pKa calculations
  • MCCE2 — Multi-Conformation Continuum Electrostatics (Version 2)
  • Karlsberg+[dead link] — pKa computation with multiple pH adapted conformations
  • PETIT — Proton and Electron TITration
  • GMCT — Generalized Monte Carlo Titration
  • DEPTH web server — Empirical calculation of pKa values using Residue Depth as a major feature
Retrieved from "https://en.wikipedia.org/w/index.php?title=Protein_pKa_calculations&oldid=1211071703"