SIG MPX

SIG MPX
SIG MPX
	SIG MPX with a silencer and SIG red dot sight
Type	Submachine gun
Place of origin	United States
Service history
In service	2015–present
Production history
Designed	2013
Manufacturer	SIG Sauer
Produced	2015–present
Variants	See Variants
Specifications
Mass	2.7 kg (6.1 lbs)
Length	425 mm (16.7 in), stock folded ; 610 mm (24.0 in), stock extended
Barrel length	114 mm (4.5 in); 165 mm (6.5 in) ; 203 mm (8 in)
Cartridge	9×19mm Parabellum
Action	Short-stroke gas-operated, closed rotating bolt
Rate of fire	850 RPM
Feed system	10-, 20-, 30- or 35-round detachable box magazine, 50 round drum magazine

The SIG MPX is a gas-operated submachine gun designed and manufactured by SIG Sauer, and is primarily chambered in 9×19mm Parabellum. It is a gas-operated firearm featuring a closed, rotating bolt.^[2] These design features, rare in submachine guns, were chosen to enhance the safety of the user and to have a more reliable firearm.^[3] It was designed in 2013 and was released to the general public in 2015.^[4] It features the SIG Sauer short stroke push-rod gas system to reduce the recoil and improve the reliability of the weapon.

The MPX, in its second generation, features a system that would allow for conversion from 9mm to .357 SIG or .40 S&W. However, since its inception, first party conversion kits have not been made available for either of the two production generations of the gun.^[5]

SIG Sauer also used the same gas piston system to develop the SIG MCX carbine.

Design details

SIG MPX with Republic of China Marine Corps Special Service Company Operator

The standard variant of the MPX comes with an 8.0 inch (20.3 cm) barrel and is chambered in 9×19mm Parabellum. It comes with a collapsible stock and a free-floating rail. It has a cyclic rate of fire of 850 rounds per minute (RPM).^[6]^[7]

The MPX is also available with different barrel lengths, ranging from 114 to 406mm (4.5- to 16-inch).^[8] The MPX submachine gun is only available for military and law enforcement use, while a semi-automatic only version is also available for the civilian market.

The semi-automatic version of the weapon can be registered as a short-barreled rifle in most states in the United States.^[5]

Features

The standard MPX submachine gun comes with no sights and a full-length Picatinny rail system on the top of the weapon. Gen 2 MPX's come with a flat faced Timney trigger and M-LOK rail.

The MPX has a short-stroke gas piston system in order to increase the accuracy of the weapon which operates from a closed bolt.^[2] It is designed in this way to prevent water or dirt from entering the chamber and causing malfunctions as well as to use a suppressor with greater ease.^[9] It features an ambidextrous selector switch for fully automatic (law enforcement/military models) and semi-automatic. It also features an ambidextrous bolt release and ambidextrous magazine release. The barrel is free-floating and is surrounded by polymer/steel Picatinny rail (later M-LOK) mounts.

The charging handle of the weapon is at the back of the weapon, based on the AR-15 design. This is to ensure that cocking the weapon does not interfere with any optics mounted onto the Picatinny rail. The weapon's rails are made out of cast steel and the standard weapon overall weighs 2.1 kilograms (4.6 lb).

Variants

Selective fire configurations

MPX (Standard variant)

A pistol variant with a three-position collapsible arm support with a stock-like appearance, three-position fire selector if it supports full automatic and an 14” blind pined and welded muzzle brake 16”, 8.0, 6.0 4.5 inch barrel.^[10]

MPX-K (Compact variant)

A compact variant with a 114 mm (4.5 inch) barrel.

MPX-SD (Integrally suppressed variant)

A fully suppressed variant with an MP5SD-like integral suppressor, a longer fore-end and a 203 mm (8.0 inch) barrel.

Semi-automatic only configurations

MPX Pistol (Pistol variant)

A semi-automatic only pistol variant with no stock and a 203 mm (8.0 inch) barrel.

MPX PSB (Pistol variant)

A semi-automatic only pistol variant with a SIG SBX pistol stabilizing brace and an 203 mm (8.0 inch) barrel. In the US in 2015 the BATFE warned users of weapons using SIG stabilizing braces that shouldering a weapon fitted with a brace constituted the making of a Title II NFA weapon, reversing a prior ruling that it did not.^[11] In early 2017, however, the BATFE withdrew this opinion.^[12]

MPX-K (Pistol variant)

A semi automatic only pistol variant with a 114 mm (4.5 inch) barrel.^[13]

MPX-C (Carbine variant)

A semi-automatic only carbine variant, featuring a 165 mm (6.5 inch) barrel with a 241 mm (9.5 inch) muzzle device permanently welded to it, which is actually a modified version of the baffle core of the integrally suppressed variant. SIG contended that this device was a muzzle brake, but in 2013 the BATFE ruled that the component was a suppressor, and classified the MPX-C as possessing an integral suppressor and thus as a Title II NFA weapon. The BATFE rejected an appeal against this ruling in February 2014; SIG responded by filing a civil lawsuit against the BATFE,^[14] alleging they had acted in an "arbitrary and capricious manner". In September 2015, Federal Judge Paul Barbadora upheld the BATFE's ruling.^[15]

As a result of this SIG has announced a carbine variant with a 406 mm (16 inch) barrel without the muzzle device, designated as the MPX PCC.^[3]

Users


Country	Organization/Notes	Reference
Hong Kong	Hong Kong Police Force, Hong Kong Correctional Service	^[16]
India	National Security Guards	^[17]
Indonesia	Detachment 88	^[18]
Malaysia	Malaysian Army	^[19]
Switzerland	Geneva Police	^[20]
Trinidad and Tobago	Trinidad and Tobago Police Service	^[21]
Thailand	Royal Thai Police	^[22]
Republic of China	Republic of China Army, Republic of China Marine Corps and Republic of China National Police Agency	^[23]
United States	United States Army: US Army Contracting Command purchased 4.5" and 8" barreled variants of the MPX	^[24]