Jcmaco

Hello Jcmaco and welcome to Wikipedia! Hope you like it here, and stick around.

Here are some tips to help you get started:

• To sign your posts (on talk pages, for example) use the '~' symbol. To insert just your name, type ~~~ (3 tildes), or, to insert your name and timestamp, use ~~~~ (4 tildes).
• Try the Tutorial, and feel free to experiment in the test area.
• If you need help, post a question at the Help Desk
• Follow the Wikipedia:Simplified Ruleset
• Eventually, you might want to read the Manual of Style and Policies and Guidelines.
• Remember Wikipedia:Neutral point of view
• Explore, be bold in editing pages, and, most importantly, have fun!

Good luck!

--Jcmaco | Talk 16:16, Jul 16, 2004 (UTC)

Knots

Hey! Thanks a ton for helping to improve the knots listed on wikipedia. sik0fewl and I were doing a bit of talking on IRC about trying to really organize the knots better. He made a good start for a template on Talk:Alpine_butterfly_knot. I'd love if you'd go take a look and give your input. I was thinking about maybe starting a wikipedia project for knots, but I haven't done a lot of research on it. kmccoy (talk) 18:17, 16 Jul 2004 (UTC)

MOSFET

Hi,

I've reverted your latest addition to MOSFET. While I understand that it is correct, you must understand that all MOSFET manufacturers have given a fancy name to their technology, although most of them use a DMOS structure. I don't think this is of interrest in the MOSFET page (as far as I know, Fairchild's contribution to the MOSFET history is not much more than that of the others...). If you really want to put it, why not add it to Power MOSFET under a new section (e.g "trade names")? CyrilB 21:22, 29 May 2006 (UTC)

Battery tests

I used a D cell Duracell, and I was surprised to find that the used cell kept putting out 1.3 to 1.4 amps for 4 minutes and held the voltage to 1.0 volts. It showed no signs of pooping out after 4 minutes. In fact, I gave it a 4 minute rest, then it gave 1.4 amps for another 3 minutes whithout collapsing. I expect that it could supply more current for several minutes, but remember that the load resistance has to be extremely small for that to happen. What is the iresistance of your circuit? My test circuit just happened to have enough resistance that it could not draw more. At a specified internal resistance of 0.2 ohms, a D alkaline should be able to put out 7.5 amps into a short circuit initially. I did not want to connect my digital multimeter directly across the cell because the 10 amp fuse is expensive and I was afraid of an initial current surge. You said you are restricted to AA cells as energy sources. My theory is that whatever is not explicitly prohibited in such an assignment is pretty much allowed, and if you want to boost the initial current, or to allow bursts of high current, you badly need a husky electrolytic capacitor connected across the battery. The energy draw will vary as the motor load varies, and a cap will reduce the chance of stalling. The draw will probably not be a constant 20 watts. A capacitor, initially discharged, cannot properly be called a source of energy. You could put a large resistance (megohm) across the cap to ensure it is initially discharged. You did not specify how long you need to draw the 20 watts from the battery. Nor did you note the efficiency of the DC-DC converter. Perhaps you could use a low burden DC-DC converter or a lower burden 3 terminal LM3xx regulator to supply your microcontroller (do they make them to run on around 1 volt?) with raw DC from the battery to the motor. Motors do not need highly conditioned power. A motor controller using pulse width modulation might be more efficient if more total Joules are needed, or just a simple switching circuit that uses the full energy from the battery, or a tiny relay. Figure out how long the little machine has to run. Figure out series (preferred) or parallel connection. Series will give the electronics more voltage to work with, and avoid discharge from one cell to the other. I have found that Energizer alkalines tolerate high discharge better than Duracell. For your project you will want to use a fresh cell, of course. 20 watts from 3 volts is 6.66 amps, and I doubt that an alkaline AA can put out that much, so redesign to reduce the power requirement, or use a cap to store up energy for the bursts of power when the motor has to release a rubber band or some such. To current test your AA alkaline, you can use a length of wire as a resistor. 3 amps from 1.5 volts requires .5 ohms, which would be 31 feet of #22 wire, reduced by the meter resistance. Rather than a rheostat, you can put clip leads at fractions of the total wire or solder coils of wire to a rotary switch and just short out segments of the wire to maintain the current if the voltage declines, or just slide a clip lead along the length of bare wire to maintain current. Any cheap digital VM is pretty accurate with DC voltage. A wire table such as[1] will let you guesstimate what length of wire to use based on bare wire you find at a hardware store. Edison 15:44, 18 January 2007 (UTC)

Reply in WP:RD

I replied a last time to your question regarding the curve. Just in case you won't check the topic anymore. Cheers. 84.90.24.136 21:56, 18 May 2007 (UTC)

AfD nomination of Robofoot ÉPM

I have nominated Robofoot ÉPM, an article you created, for deletion. I do not feel that this article satisfies Wikipedia's criteria for inclusion, and have explained why at Wikipedia:Articles for deletion/Robofoot ÉPM. Your opinions on the matter are welcome at that same discussion page; also, you are welcome to edit the article to address these concerns. Thank you for your time. - Jameson L. Tai ^{talk ♦ contribs} 20:30, 15 February 2008 (UTC)

Image copyright problem with File:NPN transistor switch inverse.png

Thanks for uploading File:NPN transistor switch inverse.png. The image has been identified as not specifying the copyright status of the image, which is required by Wikipedia's policy on images. Even if you created the image yourself, you still need to release it so Wikipedia can use it. If you don't indicate the copyright status of the image on the image's description page, using an appropriate copyright tag, it may be deleted some time in the next seven days. If you made this image yourself, you can use copyright tags like {{PD-self}} (to release all rights), {{self|CC-by-sa-3.0|GFDL}} (to require that you be credited), or any tag here - just go to the image, click edit, and add one of those. If you have uploaded other images, please verify that you have provided copyright information for them as well.

For more information on using images, see the following pages:

• Wikipedia:Image use policy
• Wikipedia:Image copyright tags

This is an automated notice by STBotI. For assistance on the image use policy, see Wikipedia:Media copyright questions. NOTE: once you correct this, please remove the tag from the image's page. STBotI (talk) 18:32, 29 January 2009 (UTC)

Articles for deletion nomination of Muine

I have nominated Muine, an article that you created, for deletion. I do not think that this article satisfies Wikipedia's criteria for inclusion, and have explained why at Wikipedia:Articles for deletion/Muine (2nd nomination). Your opinions on the matter are welcome at that same discussion page; also, you are welcome to edit the article to address these concerns. Thank you for your time.

Please contact me if you're unsure why you received this message. Psychonaut (talk) 12:22, 28 January 2010 (UTC)

Proposed deletion of Robofoot ÉPM

The article Robofoot ÉPM has been proposed for deletion because of the following concern:

non-notable group.

While all contributions to Wikipedia are appreciated, content or articles may be deleted for any of several reasons.

You may prevent the proposed deletion by removing the {{dated prod}} notice, but please explain why in your edit summary or on the article's talk page.

Please consider improving the article to address the issues raised. Removing {{dated prod}} will stop the proposed deletion process, but other deletion processes exist. The speedy deletion process can result in deletion without discussion, and articles for deletion allows discussion to reach consensus for deletion. Ridernyc (talk) 14:21, 14 February 2010 (UTC)

Speedy deletion nomination of Robofoot ÉPM

A tag has been placed on Robofoot ÉPM requesting that it be speedily deleted from Wikipedia. This has been done under section A7 of the criteria for speedy deletion, because the article appears to be about about a person, organization (band, club, company, etc.) or web content, but it does not indicate how or why the subject is important or significant: that is, why an article about that subject should be included in an encyclopedia. Under the criteria for speedy deletion, such articles may be deleted at any time. Please see the guidelines for what is generally accepted as notable. You may also wish to consider using a Wizard to help you create articles - see the Article Wizard.

If you think that this notice was placed here in error, you may contest the deletion by adding {{hangon}} to the top of the page that has been nominated for deletion (just below the existing speedy deletion or "db" tag), coupled with adding a note on the talk page explaining your position, but be aware that once tagged for speedy deletion, if the page meets the criterion, it may be deleted without delay. Please do not remove the speedy deletion tag yourself, but don't hesitate to add information to the page that would render it more in conformance with Wikipedia's policies and guidelines. Lastly, please note that if the page does get deleted, you can contact one of these admins to request that they userfy the page or have a copy emailed to you. Ridernyc (talk) 14:21, 14 February 2010 (UTC)

File:Noose.jpg missing description details

Dear uploader: The media file you uploaded as File:Noose.jpg is missing a description and/or other details on its image description page. If possible, please add this information. This will help other editors to make better use of the image, and it will be more informative for readers.

If the information is not provided, the image may eventually be proposed for deletion, a situation which is not desirable, and which can easily be avoided.

If you have any questions please see Help:Image page. Thank you. Sfan00 IMG (talk) 14:13, 2 October 2011 (UTC)

File source problem with File:Running bowline.jpg

Thank you for uploading File:Running bowline.jpg. I noticed that the file's description page currently doesn't specify who created the content, so the copyright status is unclear. If you did not create this file yourself, you will need to specify the owner of the copyright. If you obtained it from a website, please add a link to the page from which it was taken, together with a brief restatement of the website's terms of use of its content. If the original copyright holder is a party unaffiliated with the website, that author should also be credited. Please add this information by editing the image description page.

If the necessary information is not added within the next days, the image will be deleted. If the file is already gone, you can still make a request for undeletion and ask for a chance to fix the problem.

Please refer to the image use policy to learn what images you can or cannot upload on Wikipedia. Please also check any other files you have uploaded to make sure they are correctly tagged. Here is a list of your uploads. If you have any questions or are in need of assistance please ask them at the Media copyright questions page. Thank you. Sfan00 IMG (talk) 10:55, 14 June 2014 (UTC)

File source problem with File:Running bowline howto.jpg

Thank you for uploading File:Running bowline howto.jpg. I noticed that the file's description page currently doesn't specify who created the content, so the copyright status is unclear. If you did not create this file yourself, you will need to specify the owner of the copyright. If you obtained it from a website, please add a link to the page from which it was taken, together with a brief restatement of the website's terms of use of its content. If the original copyright holder is a party unaffiliated with the website, that author should also be credited. Please add this information by editing the image description page.

If the necessary information is not added within the next days, the image will be deleted. If the file is already gone, you can still make a request for undeletion and ask for a chance to fix the problem.

Please refer to the image use policy to learn what images you can or cannot upload on Wikipedia. Please also check any other files you have uploaded to make sure they are correctly tagged. Here is a list of your uploads. If you have any questions or are in need of assistance please ask them at the Media copyright questions page. Thank you. Sfan00 IMG (talk) 10:56, 14 June 2014 (UTC)

File source problem with File:Noose howto.jpg

Thank you for uploading File:Noose howto.jpg. I noticed that the file's description page currently doesn't specify who created the content, so the copyright status is unclear. If you did not create this file yourself, you will need to specify the owner of the copyright. If you obtained it from a website, please add a link to the page from which it was taken, together with a brief restatement of the website's terms of use of its content. If the original copyright holder is a party unaffiliated with the website, that author should also be credited. Please add this information by editing the image description page.

If the necessary information is not added within the next days, the image will be deleted. If the file is already gone, you can still make a request for undeletion and ask for a chance to fix the problem.

Please refer to the image use policy to learn what images you can or cannot upload on Wikipedia. Please also check any other files you have uploaded to make sure they are correctly tagged. Here is a list of your uploads. If you have any questions or are in need of assistance please ask them at the Media copyright questions page. Thank you. Stefan2 (talk) 13:17, 20 June 2014 (UTC)

ArbCom elections are now open!

Hi,
You appear to be eligible to vote in the current Arbitration Committee election. The Arbitration Committee is the panel of editors responsible for conducting the Wikipedia arbitration process. It has the authority to enact binding solutions for disputes between editors, primarily related to serious behavioural issues that the community has been unable to resolve. This includes the ability to impose site bans, topic bans, editing restrictions, and other measures needed to maintain our editing environment. The arbitration policy describes the Committee's roles and responsibilities in greater detail. If you wish to participate, you are welcome to review the candidates' statements and submit your choices on the voting page. For the Election committee, MediaWiki message delivery (talk) 12:49, 23 November 2015 (UTC)

Proposed deletion of Muine

The article Muine has been proposed for deletion because of the following concern:

Non-notable, no coverage outiside of opinion/blog sources.

While all constructive contributions to Wikipedia are appreciated, pages may be deleted for any of several reasons.

You may prevent the proposed deletion by removing the {{proposed deletion/dated}} notice, but please explain why in your edit summary or on the article's talk page.

Please consider improving the page to address the issues raised. Removing {{proposed deletion/dated}} will stop the proposed deletion process, but other deletion processes exist. In particular, the speedy deletion process can result in deletion without discussion, and articles for deletion allows discussion to reach consensus for deletion. - CHAMPION ^{(talk) (contributions) (logs)} 00:21, 24 August 2018 (UTC)